ꄴPrevious： Phoenix VAL-SEC-T2-175-P-2 class surge protector 2905355
ꄲNext： Phoenix VAL-MS 230/1 Class 1 - 2 surge protector 2804429

Phoenix VAL-SEC-T2-N/PE-175-P-2 surge protector 2905356,VALVETRAB the spare plug of SEC series surge protector, used for N-PE path.

Product Type Spare Plug
product series SEC Family
IEC Category II
T2
EN Type T2
IEC power supply system TN
TT
type needle type
Bits 1
Surge protection fault alarm with visual status indication window
insulation characteristics
Overvoltage Category III
pollution level 2

Rated frequency fN 50Hz (60 Hz)

Connection Mode pluggable

Dimensional drawing
width 11.7mm
height 46.4mm
depth 59.4mm
Horizontal stitch pitch 0.6 Partition

color light gray (RAL 7035)
flame retardant rating, according to UL 94 V-0
material 600
insulation material PA6.6-FR 20% GF
PBT-FR
Material Group I
Shell Material PA 6.6-FR 20 % GF
PBT-FR

protection channel N-PE
Direction of action N-PE
Rated voltage UN 120V AC (TN - only N-PE)
120V AC (TT - only N-PE)
Rated frequency fN 50Hz (60 Hz)
Maximum continuous voltage Uc 150V AC
Residual Flow IPE ≤ 1 µA
Nominal discharge current In(8/20)µs 20 kA
Maximum discharge current Imax(8/20) µs 40 kA
Disconnect freewheeling capacity Ifi 100 A (150V AC)
voltage protection level Up ≤ 0.95 kV
Residual pressure Ures ≤ 0.4 kV (In)
≤ 0.4 kV (10 kA)
≤ 0.4 kV (at 5 kA)
≤ 0.4 kV (at 4 kA)
≤ 0.4 kV (2 kA)
6 kV (1.2/50)& micro;s ≤ 0.95 kV
UT 1200V AC (200 ms/withstand mode)
response time tA ≤ 100 ns

environmental conditions
protection level IP20
ambient temperature (operation) -40°C ... 80°C
ambient temperature (storage/transport) -40°C ... 80°C
elevation ≤ 2000 m (amsl)
Allowable humidity (operating) 5%... 95%
Impact Force (Operation) 30g (half sine/11 ms/ 3x ± X,± Y, ± Z)
vibration (operation) 5g (10 ... 500Hz / 2.5 h / X,Y,Z)
2905346
넳 넲

Phoenix VAL-SEC-T2-N/PE-175-P-2 class surge protector 2905356

Product Center

PRODUCT CENTER

▼