Phoenix GTF 76/230-Breaking Terminal 3121012, Breaking Terminal, Nominal Operating Voltage: 250V, Rated Current: 41 A, First Layer, Wiring Mode: Screw Connection, Rated Wiring Capacity: 6mm2, Wiring Capacity: 0.5 mm2 -10mm2, Installation: NS 35/7,5, NS 35/15, NS 32, Color: Grey
| Product Type |
Breaking terminal |
| connection quantity |
2 |
| Rows |
1 |
| potential |
1 |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Rated surge voltage |
4 kV |
| rated conditions |
1.31W |
| LED voltage range |
110V AC ... 250V AC |
| LED current range |
0.5 mA ... 1 mA |
| LED voltage range |
110V AC ... 250V AC |
| the number of connections per layer |
2 |
| Rated cross section |
6 mm² |
| first layer |
| thread |
M4 |
| Tightening torque |
1.2 ... 1.5 Nm |
| stripping length |
12mm |
| plug gauge |
A5 |
| Rigid conductor cross section |
0.5 mm² ... 10 mm² |
| cross-section AWG |
20 ... 8 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.5 mm² ... 6 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
20 ... 10 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.5 mm² ... 6 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.5 mm² ... 4 mm² |
| 2 wires of the same cross section, rigid wire |
0.5 mm² ... 6 mm² |
| 2 wires with the same cross section, flexible wire |
0.5 mm² ... 6 mm² |
| 2 wires with the same cross section, flexible, with sleeve but not plastic sleeve |
0.5 mm² ... 4 mm² |
| 2 wires with the same cross section, flexible, with TWIN sleeve and plastic sleeve |
0.5 mm² ... 4 mm² |
| Nominal current |
41 A |
| Maximum load current |
57 A |
| Rated voltage |
250V |
| 110V |
| Rated cross section |
6 mm² |
| width |
22.5mm |
| height |
64.5mm |
| NS 15 Depth |
53.5mm |
| NS 32 Depth |
59mm |
| NS 35/7,5 depth |
54mm |
| NS 35/15 Depth |
61.5mm |
| color |
gray (RAL 7042) |
| flame retardant rating to UL 94 |
V0 |
| Insulation Material Group |
I |
| insulation material |
PA |
| Application of Static Insulation Materials at Low Temperature |
-60°C |
| insulating materials (DIN EN 60216-1(VDE 0304-21)) |
130°C |
| Insulation Relative Temperature Index (Electrical, UL 746 B) |
130°C |
| railway vehicles (DIN EN 45545-2) R22 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R23 |
HL 1 - HL 3 |
| railway vehicles (DIN EN 45545-2) R24 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R26 |
HL 1 - HL 3 |
| Thermal Release NFPA 130 (ASTM E 1354) |
28 MJ/kg |
| Surface Flammability NFPA 130 (ASTM E 162) |
through |
| Smoke specific optical density NFPA 130 (ASTM E 662) |
through |
| Smoke Toxicity NFPA 130 (SMP 800C) |
through |
