Phoenix OPT- 5DC/ 24DC/ 2-Micro solid state relay 2967989, plug-in micro solid state relay, power solid state relay, 1 normally open contact, input voltage 5V DC
| Product Type | Single-phase solid state relay |
| Mode of operation | 100% operating factor |
| Insulation Characteristics: Standards/Regulations | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 11.07.2024 |
| rated conditions | 0.05W |
| test voltage (input/output) | 2.5 kV (50Hz,1 minute, input/output) |
| Rated input voltage UN | 5V DC |
| relative to UNinput voltage range | 0.8 ... 1.2 |
| Input Voltage Range | 4V DC ... 6V DC |
| switch threshold "0" signal, reference UN | 0.15 |
| switch threshold "1" signal, reference UN | 0.5 |
| UN | 9 mA |
| Typical Response Time | 20 µs (UN) |
| Typical closing time | 300 µs (UN) |
| sending frequency | 300Hz |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Output Voltage Range | 3V DC ... 33V DC |
| limit continuous current | 3 A (see Temperature Load Curve) |
| Maximum starting current | 15 A (10 ms) |
| Voltage drop at maximum limited continuous current | ≤ 150 mV |
| output circuit | 2-wire connection, floating |
| protection circuit | polarity protection |
| Surge Protection |
| Dimensional drawing | |
| width | 5mm |
| height | 28mm |
| depth | 15mm |
| color | black (RAL 9005) |
| environmental conditions | |
| protection level | RT III |
| ambient temperature (operation) | -25°C ... 60°C |
| ambient temperature (storage/transport) | -25°C ... 70°C |
Phoenix OPT- 5DC/ 24DC/ 2-Miniature Solid State Relay 2967989
