Phoenix UM 45-FLKS50-terminal module 2962696,VARIOFACE module, with screw wiring and flat cable connector, can be installed on NS35/7.5 rail, 50 positions
| Product Type | Interface Module |
| Product Series | VARIOFACE |
| Bits | 50 |
| Channels | 16 |
| insulation characteristics: electrical clearance and creepage distance | |
| insulation | Functional insulation |
| Overvoltage Category | II |
| pollution level | 2 |
| Nominal operating voltage (AC) | ≤ 30V AC |
| Nominal operating voltage (DC) | ≤ 60V DC |
| current (per branch) | ≤ 1 A |
| electrical clearance and creepage distance | |
| Rated insulation voltage | 63V |
| Rated overvoltage | 0.6 kV (1.2 / 50 μs) |
| Applicable I/O Card | 6ES7431-0HH0-0AB0 |
| 6ES7431-1KF00-0AB0 | |
| 6ES7431-1KF10-0AB0 | |
| 6ES7431-1KF20-0AB0 | |
| 6ES7431-7KF00-0AB0 | |
| 6ES7431-7KF10-0AB0 | |
| 6ES7431-7QH00-0AB0 | |
| 6ES7432-1HF00-0AB0 | |
| Interface 1 (Control Layer) | |
| connection meets standards | IEC 60603-13 |
| Connection Mode | IDC/FLK Pin Row |
| connection quantity | 1 |
| Bits | 50 |
| Insertion/unplugging cycle | > 50 |
| needle pitch | 2.54mm |
| interface 2 (field side) | |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Bits | 51 |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.25 mm² ... 1 mm² (cold press head without plastic sleeve) |
| 0.25 mm² ... 1.5 mm² (cold press head with plastic sleeve) | |
| Attachable Guide Cross Section AWG | 26 ... 16 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| needle pitch | 5.08mm |
| Status Display | No |
| Product Size | |
| width | 111mm |
| height | 45mm |
| depth | 52.26mm |
| color | Green (RAL 6021) |
| Shell insulation material | PVC |
| environmental conditions | |
| protection level (module) | IP00 |
| protection level (installation position) | ≥ IP54 |
| ambient temperature (operation) | -20°C ... 50°C |
| ambient temperature (storage/transport) | -20°C ... 70°C |
| elevation | ≤ 2000 m |
| electrical clearance and creepage distance | |
| Standards/Regulations | EN IEC 60664-1 |
| Installation Type | DIN rail mounting |
| Installation position | arbitrary |