Phoenix VAL-MS 230 IT/3 Class 1 - 2 surge protector 2858548, surge protector, with base and protective connector, installed on NS 35/7.5 rail, used for: 230V AC--IT system, 3 1 protection mode.
| Product Type | surge protector |
| product series | VALVETRAB MS |
| IEC Category | II |
| T2 | |
| EN Type | T2 |
| IEC power supply system | TN-S |
| TT | |
| type | DIN rail module, split, detachable |
| Bits | 4 |
| Surge protection fault alarm | with visual status indication window |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| Connection Mode | screw connection |
| thread | M5 |
| Tightening torque | 3 Nm (1.5 mm² ... 16 mm²) |
| 4.5 Nm (25 mm² ... 35 mm²) | |
| stripping length | 16mm |
| Flexible Wire Cross Section | 1.5 mm² ... 25 mm² |
| Rigid conductor cross section | 1.5 mm² ... 35 mm² |
| Attachable Guide Cross Section AWG | 15 ... 2 |
| Connection Mode | fork cable end |
| Flexible Wire Cross Section | 1.5 mm² ... 16 mm² |
| Dimensional drawing | |
| width | 71mm |
| height | 89.8mm |
| depth | 65.7mm (7.5mm with DIN rail) |
| Horizontal stitch pitch | 4 Zoning |
| color | black (RAL 9005) |
| flame retardant rating, according to UL 94 | V-0 |
| material | 600 |
| insulation material | PA 6.6/PBT |
| Material Group | I |
| Shell Material | PA 6.6 |
| PBT |
| protection channel | L-N |
| L-PE | |
| N-PE | |
| movement direction | 3L-N & N-PE |
| Rated voltage UN | 240/415V AC (TN-S) |
| 240/415V AC (TT) | |
| Rated frequency fN | 50Hz (60 Hz) |
| Maximum continuous operating voltage UC(L-N) | 385V AC |
| Maximum continuous operating voltage UC(L-PE) | 385V AC |
| Maximum continuous operating voltage UC(N-PE) | 260V AC |
| Rated load current IL | 80 A |
| Residual Flow IPE | ≤ 5 µA |
| Standby power consumption PC | ≤ 525 mVA |
| Nominal discharge current In(8/20)µs | 20 kA |
| Maximum discharge current Imax(8/20) µs | 40 kA |
| Rated open freewheeling value Ifi(N-PE) | 100 A |
| Rated short-circuit current ISCCR | 25 kA |
| voltage protection level Up(L-N) | ≤ 1.8 kV |
| voltage protection level Up(L-PE) | ≤ 2.2 kV |