Phoenix QUINT4-BUFFER/24DC/20-buffer module 2907913,QUINT buffer module, with maintenance-free capacitive high-power storage device, for DIN rail installation, input: 24V DC, output: 24V DC/20 A, including installed UTA 107 universal DIN rail adapter.
| Input Voltage Range |
22.5V DC ... 30V DC |
| Fixed Backup Threshold |
< 22V DC |
| Supply Voltage |
DC |
| Current consumption Imax(UN,IOUT= IStat.Boost,ICharge= max) |
26 A (max.) |
| Current consumption INo-Load(UN,IOUT= 0, Icharge= 0) |
0.2 A (no load) |
| Current consumption Icharge(UN,IOUT= 0, Icharge= max) |
0.6 A (Charging) |
| buffer time |
0.2 s (20 A) |
| 2 s (2 A) |
| efficiency |
> 98% (with charging power storage device) |
| and connect |
No |
| Concatenation |
No |
| mains power supply |
| output voltage |
24V DC (depending on input voltage) |
| Output current IN |
20 A |
| Maximum rated load power loss |
< 6W |
| Buffer Mode |
| output voltage |
Typical 22V DC |
| Output current IN |
20 A (according to output current) |
| Static Boost (IStat.Boost) |
25 A |
| Maximum rated load power loss |
< 6W |
| Input |
| Rated capacity |
1 mAh |
| Overview |
| IQ-Technology |
None |
| signal status UIN OK |
| Wiring Identification |
3.1,3.2 |
| switch output |
electronic relay (OptoMOS) |
| status (configurable) |
UInOK |
| output voltage |
30V DC |
| output can be loaded |
200 mA |
| LED status indicator |
green (UInnormal) |
| Signal Threshold |
effective range |
| signal status Ready |
| Wiring Identification |
3.3 |
| switch output |
transistor output, active |
| status (configurable) |
Ready |
| Status Conditions (Configurable) |
state of charge = 100% or buffer mode |
| output voltage |
24V (UN- 2V (typical)) |
| output can be loaded |
20 mA |
| Signal Ground SGND |
| Wiring Identification |
3.4 |
| Function |
signal grounding |
| reference potential |
3.3 Ready |
| insulation voltage input/output/housing |
500V |
