Phoenix QUINT4-PS/1AC/24DC/10/-power supply 2904616, primary switched QUINT POWER power supply for DIN rail installation, with optional output characteristic curve and SFB (selective fusing), protective coating and built-in decoupling MOSFET, input: 1 phase, output: 24V DC/10 A
Control Input (Configurable) Rem
output power ON/OFF (SLEEP MODE)
Default (Value)
Output power ON (>40 kΩ/24V DC/Open bridge between Rem and SNew)
AC operation
Network Type
star network
Rated input voltage range
100V AC ... 240V AC
Input Voltage Range
100V AC ... 240V AC -15 % ... +10%
Attenuation
< 100V AC (1 %/V)
maximum dielectric strength
300V AC 60 s
National Grid Typical Voltage
120V AC
230V AC
Supply Voltage
AC
Impulse current
Typical 15 A (at 25°C)
impulse current integral (I2t)
< 0.9 A2s
Surge current limit
15 A (after 1 ms)
AC frequency range
50Hz ... 60Hz-10%... + 10%
frequency range (fN)
50Hz ... 60Hz-10%... + 10%
16.7Hz (in accordance with EN 50163)
grid buffer time
Typical 53 ms (120V AC)
Typical 55 ms (230V AC)
power consumption
3.4 A (100V AC)
2.8 A (120V AC)
1.5 A (230V AC)
1.5 A (240V AC)
Rated power consumption
274 VA
protection circuit
transient surge protection; varistor, gas discharge tube
power factor (cos phi)
0.94
Suction time
< 1 s
Typical Response Time
300 ms (from SLEEP MODE)
input fuse
8 A (slow fuse, internal)
recommend use
10 A ... 16 A (characteristics B, C, D, K or similar)
