Phoenix QUINT4-PS/48DC/48DC/5/PT-DC/DC converter 2910128, primary switching DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 48V DC, output: 48V DC/5 A
| Rated input voltage range |
48V DC |
| Input Voltage Range |
48V DC -40 % ... +20% |
| Wide Input |
No |
| maximum dielectric strength |
60V DC (60 seconds) |
| Impulse current |
Typical 2.3 A |
| impulse current integral (I2t) |
< 0.1 A2s |
| Surge current limit |
2.3 A |
| grid buffer time |
Typical 17 ms (48V DC) |
| power consumption |
6.8 A (48V DC) |
| Typical Response Time |
300 ms (from SLEEP MODE) |
| Suction time |
< 1 s |
| input fuse |
20 A (slow fuse, internal) |
| recommend use |
10 A ... 16 A (characteristics B, C, D, K or similar) |
| efficiency |
Typical 95.2 % (48V DC) |
| output characteristics |
U/ I Advanced |
| Smart HICCUP |
| FUSE MODE |
| Rated output voltage |
48V DC |
| output voltage (USet) setting range |
48V DC ... 56V DC (> 48V stable capacity) |
| Rated output current (IN) |
5 A |
| Static Boost (IStat.Boost) |
6.25 A |
| Dynamic Boost (IDyn.Boost) |
10 A (5 s) |
| selective fusing (ISFB) |
30 A (15 ms) |
| Type of thermal magnetic circuit breaker |
A1. .. A6 / B2 / C1 ... C2/Z1. .. Z6 |
| Short-circuit protection |
is |
| Anti-aircraft turn |
is |
| output power (PN) |
240W |
| output power (PStatic Margin) |
300W |
| output power (Pdynamic margin) |
480W (5 s) |
| feedback voltage resistance |
≤ 60V DC |
| output |
≤ 60V DC |
| residual wave |
< 50 mVSS |
| control deviation static |
<3% (load change, static 10%... 90%) |
| control deviation dynamics |
<3% (load change, static 10%... 90%) |
| Control Deviation Input Voltage Change |
<3% (load change, static 10%... 90%) |
| rise time |
< 100 ms (UOUT(10%... 90%)) |
| Concatenation |
is |
| maximum no-load power consumption |
< 3W |
| Maximum rated load power loss |
< 13W |
| Power consumption SLEEP MODE |
< 2W |
| and connect |
Yes, for redundancy and increased capacity |
| Input |
| Location |
1.x |
| Wire Connection |
| Connection Mode |
in-line connection |
| Rigidity |
0.2 mm² ... 6 mm² |
| flexibility |
0.2 mm² ... 6 mm² |
| flexible strip cold press head without plastic sleeve |
0.2 mm² ... 4 mm² |
| flexible strip cold press head with plastic sleeve |
0.2 mm² ... 4 mm² |
| Rigid (AWG) |
24 ... 10 |
| stripping length |
10mm |
| Output |
| Location |
2.x |
