Phoenix QUINT-BUFFER/24DC/20-buffer module 2866213, buffer module, 24V DC/20 A, maintenance-free capacitor energy storage module. Decoupled inputs and outputs. In the download area, there is a clear selection table, which provides the load current and buffer time, as well as the charging time after the buffer mode.
| input voltage | 24V DC |
| Input Voltage Range | 22.5V DC ... 30V DC |
| DC input voltage range | 22.5V DC ... 30V DC |
| buffer time | 0.2 s (20 A) |
| 4 s (1 A) | |
| power consumption | about 0.1 a |
| 0.6 A (Charging) | |
| 20.6 A (max.) | |
| prevents polarity reversal | is |
| charging delay | No |
| Fixed Backup Threshold | < 22V DC |
| Variable Connection Threshold | (UIN- 1 V)/0.1 s |
| protection circuit | transient surge protection; suppressor diode, 35V DC |
| efficiency | > 95% |
| Rated output voltage | 24V DC (depending on input voltage) |
| output voltage (USet) setting range | 22V DC ... 28.5V DC |
| Rated output current (IN) | 20 A |
| Output Current Limit | 27 A (buffer mode) |
| bridge time | 200 ms |
| feedback voltage resistance | < 35V DC (buffer mode) |
| output | < 35V DC |
| residual wave | < 100 mVSS(buffer mode) |
| output power | 480W |
| peak switching voltage rated load | < 100 mVSS(20 MHz) |
| power consumption | 2.5W (ready at 27 A) |
| 9.8W (buffer mode at 27 A) | |
| protection circuit | transient surge protection; suppressor diode, 35V DC |
| and connect | Yes, for extended buffer time and increased redundancy |
| Concatenation | is |
| mains power supply | |
| Rated output voltage | 24V DC |
| Rated output current (IN) | 20 A |
| battery operation | |
| Rated output voltage | 24V DC |
| Rated output current (IN) | 20 A |
| signal: active (high = load buffer charged) | |
| Output Description | The power supply is normal |
| maximum switching voltage | ≤ 24V |
| output voltage | +24V |
| Continuous load current | ≤ 20 mA |
| charging current | 500 mA |
| Rated capacity | 0.1 Ah |
Phoenix QUINT-BUFFER/24DC/20-Buffer Module 2866213
