Phoenix QUINT-PS/60-72DC/24DC/10-DC/DC converter 2905009, wide-range input QUINT DC/DC converter for DIN rail installation, primary switching mode, using SFB technology (selective fusing Technology), input: 60-72V DC, output: 24V DC/10 A
| DC operation |
| Rated input voltage range |
60V DC ... 72V DC |
| Input Voltage Range |
42V DC ... 96V DC |
| Wide Input |
is |
| DC input voltage range |
42V DC ... 96V DC |
| Supply Voltage |
DC |
| Impulse current |
< 9 A (typical) |
| impulse current integral (I2t) |
0.64 A2s |
| grid buffer time |
Typical 10 ms (60V DC) |
| power consumption |
5.6 A (60V DC) |
| 4.7 A (72V DC) |
| prevents polarity reversal |
≤ 30V DC |
| protection circuit |
transient surge protection; varistor |
| input fuse |
10 A 150V DC (built-in (equipment protection)) |
| efficiency |
> 91 % (UIN60V DC / UOUT24V DC) |
| > 91 % (UIN72V DC / UOUT24V DC) |
| output characteristics |
U/ I |
| Rated output voltage |
24V DC ±1% |
| output voltage (USet) setting range |
18V DC ... 29.5V DC (> 24V DC, stable capacity limit) |
| Rated output current (IN) |
10 A (-40°C ... 60 °C) |
| POWER BOOST (IBoost) |
12.5 A (-40°C ... 40°C constant, UOUT= 24V DC) |
| selective fusing (ISFB) |
60 A (12 ms) |
| Type of thermal magnetic circuit breaker |
B2 / B4 / B6 |
| Attenuation |
60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance |
35V DC |
| output |
< 35V DC |
| Maximum capacitive load |
Unlimited |
| Active Current Limit |
18 A |
| control deviation |
<1% (load change, static 10%... 90%) |
| <2% (change of load, dynamic 10%... 90%) |
| < 0.1 % (input voltage variation is ± 10 %) |
| residual wave |
< 20 mVSS |
| Short-circuit protection |
is |
| output power |
240W |
| peak switching voltage rated load |
< 10 mVSS(20 MHz) |
| maximum no-load power consumption |
4W (UIN60V DC) |
| Maximum rated load power loss |
24W (UIN60V DC) |
| rise time |
< 2 ms (UOUT(10%... 90%)) |
| and connect |
Yes, for redundancy and increased capacity |
| Concatenation |
is |
