Phoenix MINI MCR-2-F-UI-PT-frequency transmitter 2902058, a universal configurable frequency transmitter used to convert frequency (Hz/rpm) and pulse modulation signals into standard signals. When used in combination with MINI MCR-2-SPS-PT 1033201, the sensor voltage may be greater than 8.2V DC. In-line connection technology.
| Product Type | Frequency value transformer |
| product series | MINI Analog Pro |
| Channels | 1 |
| Model | isolation amplifier |
| configuration | DIP switch |
| Software | |
| Application | |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 |
| Function | |
| configuration | DIP switch |
| Software | |
| Application | |
| step response (0-99%) | < 35 ms (f > 500 Hz) |
| maximum temperature coefficient | 0.01 %/K |
| Maximum transmission error | 0.1 % (frequency (Hz/rpm)) |
| 1% (PWM signal) | |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| Power | |
| Rated supply voltage | 24V DC |
| Supply Voltage Range | 9.6V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard)) |
| Typical current consumption | 32 mA (24V DC) |
| 63 mA (12V DC) | |
| power consumption (I output) | ≤ 1W (IOUT= 20 mA,9.6V DC,600 Ω load) |
| measurements: frequency | |
| valid input source | NAMUR sensor |
| NPN/PNP transistor output | |
| floating contact (dry contact) | |
| frequency generator | |
| Incremental Encoder (Speed Only) | |
| HTL Encoder | |
| TTL sensor | |
| S0 signal | |
| Maximum voltage input signal | 30V (including DC voltage) |
| Voltage Range | ≥ 2V |
| Frequency measurement range | 0.002Hz ... 200 kHz |
| PWM (range) | 0.002Hz ... 60Hz (duty cycle 2... 98%) |
| 60Hz ... 300Hz (duty cycle: 5... 95%) | |
| 300Hz ... 600Hz (duty cycle: 10... 90%) | |
| 600Hz ... 1000Hz (duty cycle 20... 80%) | |
| signal | |
| Input Number | 1 |
| input signal | frequency |
| switching: transistor | |
| outputs | 1 |
| Contact Type | 1 N/O contact |
| Minimum Switching Voltage | 1V |
| maximum switching voltage | 30V DC |
| minimum switching current | 100 µA |
| maximum switching current | 100 mA (30 V) |
Phoenix MINI MCR-2-F-UI-PT-Frequency Transmitter 2902058
