Phoenix MINI MCR-2-SPS-24-15-PT-constant voltage power supply 1033201, the constant voltage power supply adopts plug-in connection technology, used to generate high-precision 15V constant voltage, and power the sensor when there is no internal power supply. Plug-in connection technology.
| Product Type | constant voltage power supply |
| Product Series | MINI Analog Pro |
| insulation characteristics: GB Standard | |
| Overvoltage Category | II |
| pollution level | 2 |
| maximum temperature coefficient | < 0.01 %/K |
| Maximum transmission error | ≤ 0.4 % (of terminal value) |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| Power | |
| Supply Voltage Range | 9.6V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard)) |
| Typical current consumption | < 38.2 mA (24 V) |
| < 79.8 mA (12 V) | |
| power consumption | < 900 mW (9.6V DC) |
| signals: voltage | |
| voltage input signal | 9.6V DC ... 30V DC |
| Transmitter supply voltage | 15V |
| signals: voltage | |
| Maximum voltage output signal | 15V DC |
| short-circuit current | > 35 mA |
| lead broken | 15V |
| output current | ≤ 30 mA |
| fluctuation | < 20 mVSS(600 Ω) |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² (with cold press head) |
| 0.14 mm² ... 2.5 mm² (without cold head) | |
| Flexible Wire Cross Section | 0.14 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 (flexible) |
| Explosion-proof installation (EPL) | Gc |
| Div. 2 |
| Status Display | Green LED (supply voltage) |
| width | 6.2mm |
| height | 109.81mm |
| depth | 119.2mm |
Phoenix MINI MCR-2-SPS-24-15-PT-Constant Voltage Power Supply 1033201
