Phoenix MINI MCR-SL-2CP-I-I-passive isolator 2864655,MCR passive isolator, dual channel, used for electrical isolation of current signals, no power supply, with screw connection
| Product Type | Passive Isolator |
| product series | MINI Analog |
| Channels | 2 |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 |
| electrical isolation | 2 road isolation |
| galvanic isolation between input and output | is |
| cut-off frequency (3dB) | 75Hz |
| rated conditions | 64 mW |
| Signal Transmission Behavior | In = Out |
| step response (10-90%) | 5 ms (at 600Ω load) |
| maximum temperature coefficient | ≤ 0.002 %/K (measured value/100 Ω load) |
| temperature coefficient, typical | < 0.002 %/K (measured value/100 Ω load) |
| Maximum transmission error | ≤ 0.1 % (of terminal value) |
| additional error, depending on the load | < 0.03 % (measured value/100 Ω load) |
| electrically isolated input/output | |
| Rated insulation voltage | 50V AC/DC |
| Test Voltage | 1.5 kV AC (50 Hz, 60 s) |
| insulation | foundation isolation conforming to IEC/EN 61010 |
| power supply | |
| Supply Voltage Range | loop power supply, no external power supply required |
| power consumption | 34 mW (per channel) |
| signals: current | |
| Input Number | 2 |
| configurable/programmable | No |
| Maximum voltage input signal | 18V |
| current input signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| Maximum current input signal | 40 mA |
| response current | approx. 190 & micro;A |
| Input Voltage Limit | < 2V (20 mA) |
| voltage loss | 1.9V (I = 20 mA) |
| signals: current | |
| outputs | 2 |
| configurable/programmable | No |
| current output signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| load/output load current output | < 600 Ω (I = 20mA output signal) |
| fluctuation | < 10 mVrms(600 Ω) |
Phoenix MINI MCR-SL-2CP-I-I-Passive Isolator 2864655
