Phoenix FL WLAN 1100-wireless module 2702534,WLAN access point, client with two single-hole mounted internal antennas (MIMO),IP54,WLAN 802.11 a, B, g, n, frequency: 2.4 GHz,5 GHz (including DFS channel), connection: COMBICON 9 ... 32V DC,RJ45: for LAN,web,http/https, command line interface

Product Type Wireless Module
type Stand-Alone
insulation characteristics
Overvoltage Category None
pollution level 2
Wireless Network Card
number. 1
Model IEEE 802.11 a/B/g/n 2.4 GHz and 5 GHz to 300 Mbps
Assembly Instructions permanent installation

rated conditions 4.5W
power supply: electronic module
connection system COMBICON
Connection Mode In-line spring connection
Connection Method Considerations recommend conductor cross section: 0.75 mm²
recommend casing: connection length 10mm
recommend crimping pliers: trapezoidal or square
Name 1966101 FMC 1,5/ 3-STF-3,5
Bits 3
cross-section range AWG 24 ... 16 (use copper cable (UL temperature class 75°C))
supply voltage 24V DC (SELV)
Supply Voltage Range 18V DC ... 32V DC (PELV/SELV)
9V DC ... 32V DC (PELV/SELV (hardware version 05))
supply current Typical 120 mA (24V DC)
power consumption Maximum 250 mA (18V DC)
Max 400 mA (for 9V DC)

1966101 FMC 1,5/ 3-STF-3,5
Connection Mode In-line spring connection
Hard Wire Cross Section 0.2 mm² ... 1.5 mm²
Flexible Wire Cross Section 0.2 mm² ... 1.5 mm²
Connectable Guide Cross Section AWG 24 ... 16
stripping length 10mm

Antenna
number. 2
Connection Mode permanent installation
Connection Method Considerations MIMO
gain 5 dBi
Function
operation mode Access Point/Client Adapter/Repeater
configuration Web-based management, automated CLI
Quality of Service (QoS) is
Safety 802.11i
WPA PSK (Shared Key)
WPA2
AES
TKIP
MAC Filter
support 802.1X/RADIUS
Radio (Wireless) Certification Europe, more countries to see online stores
2702534

Phoenix FL WLAN 1100-Wireless Module 2702534

Product Center

PRODUCT CENTER