Phoenix IB IL 24 MUX MA-PAC-field multiplexer 2861205,Inline field multiplexer, with accessories (connectors and marker boards), can transmit ultra-long distance signals without configuration
| width | 48.8mm |
| height | 135mm |
| depth | 71.5mm |
| Application Description | |
| Application Description | for industrial applications only |
| Remote Bus | |
| Connection Mode | Inline Shielded Connector |
| transmission principle | RS-485 |
| Inline Local Bus | |
| Connection Mode | Inline Data Bridge Block |
| transmission speed | 500 kBit/s |
| System Limitations | |
| the number of local bus devices that can be connected | 32 (without additional power module, note total current drain allowed) |
| the number of devices with parameter channels | 0 |
| 0 | |
| Module | |
| Hex ID Encoding | None |
| relay | |
| Contact Type | normally closed contact |
| Contact Type | Floating contact |
| Switching voltage | Typical 24V DC |
| max. 150V | |
| maximum 125V AC | |
| switching current | max. 1 A |
| On-Off Capacity | maximum 30W |
| max. 60 VA | |
| Product Type | I/O components |
| product series | Inline |
| type | Module |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 (in accordance with EN 50178): |
| rated conditions | 3W |
| protection circuit | Surge protection (segment power supply, main power supply, field multiplexer power supply); input protection diode (if long-term overload will be damaged) input protection diode can be up to 1500W pulse load short circuit. |
| polarity protection (segment power supply/main power supply); parallel diode to prevent reverse polarity; when an error occurs, high current through the diode will cause the upstream fuse to blow. | |
| Reverse polarity protection (field multiplexer power supply); series diodes are located on the guide path of the power supply unit; when a fault occurs, only a low current is generated. When a fault occurs, the external power supply unit has no fuse to blow. |