Phoenix IB IL 24/230 DOR4/W-PC-PAC-relay module 2862181,Inline, relay module, relay output: 4 (floating ground), changeover contact, 24V DC,230V AC, for switching inductive and capacitive loads, local bus transmission rate: 500 kBit/s, protection level: IP20, including Inline connector and marker strip
| width |
48.8mm |
| height |
119.8mm |
| depth |
71.5mm |
| Notes on dimensional data |
Shell Size |
| Application Description |
| Application Description |
for industrial applications only |
| Inline Local Bus |
| interfaces |
2 |
| Connection Mode |
Inline data span block |
| transmission speed |
500 kBit/s |
| Module |
| ID Code (dec.) |
189 |
| Hex ID Encoding |
BD |
| Length Encoding (Hexadecimal) |
41 |
| length encoding (decimal) |
65 |
| Process Data Channel |
4. |
| Input Address Area |
0 Byte |
| Output Address Area |
4. |
| Register Length |
4. |
| the required parameter data |
3 Byte |
|
4 Byte |
| relay |
| outputs |
4 (Floating) |
| Connection Mode |
pull-back spring connection |
| Contact Type |
changeover contact |
| Switching voltage |
Minimum 5V DC |
| Max 250V DC |
| Product Type |
I/O components |
| product series |
Inline |
| type |
Module |
| Scope of supply |
includes Inline connector and marker strip |
| Channels |
4 |
| special nature |
for switching inductive and capacitive loads |
| rated conditions |
2.85W |
| potential: communication power supply (UL) |
| supply voltage |
7.5V DC (across the power supply) |
| current consumption |
Max. 187 mA |
| electrical isolation/isolation for voltage range |
| test voltage: relay contact/bus logic |
4 kV, 50 Hz, 1 min |
| test voltage: contact to contact |
1 kV, 50 Hz, 1 min |
| test voltage: contact/PE |
1 kV, 50 Hz, 1 min |
