Phoenix MACX MCR-EX-IDS-I-I-Output Isolation Amplifier 2908060, Iso Output Signal Isolation Transmitter, HART Transparent. Isolation and 0/4 mA... A 20 mA intrinals signal is transmitted to the load in the explosive zone. 3-terminal electrical isolation, line fault detection (can be turned off by DIP switch), SIL 2 (SC3) in accordance with IEC 61508, screw connection.
| Product Type | Output Isolation Amplifier |
| Product Series | MACX Analog |
| Channels | 1 |
| Model | Ex I Isolation Amplifier with SIL Functional Safety |
| configuration | DIP switch |
| Function | |
| configuration | DIP switch |
| electrical isolation | 3 End Isolation |
| signal transmission behavior | In = Out |
| step response (10-90%) | < 140 & micro;s (for jumpers 4 mA ... 20 mA) |
| maximum temperature coefficient | 0.01 %/K |
| temperature coefficient, typical | ≤ 0.005 %/K |
| Maximum transmission error | 0.1 % (final value 20 mA) |
| Typical transmission error | ≤ 0.05 % (final value 20 mA) |
| electrical isolation | |
| Overvoltage Category | II |
| pollution level | 2 |
| electrical isolation input/output IEC/EN 61010-1 | |
| Standards/Regulations | IEC/EN 61010-1 |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 2.5 kV AC (50 Hz, 60 s) |
| insulation | security isolation |
| electrically isolated input/power supply IEC/EN 61010-1 | |
| Standards/Regulations | IEC/EN 61010-1 |
| Rated insulation voltage | 50Vrms |
| Test Voltage | 1.5 kV AC (50 Hz, 60 s) |
| insulation | Foundation Isolation |
| galvanically isolated output/power supply IEC/EN 61010-1 | |
| Standards/Regulations | IEC/EN 61010-1 |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 2.5 kV AC (50 Hz, 60 s) |
| insulation | security isolation |
| galvanically isolated output/input IEC/EN 60079-11 | |
| Standards/Regulations | IEC/EN 60079-11 |
| Rated insulation voltage | 375VPP |
Phoenix MACX MCR-EX-IDS-I-I-Output Isolation Amplifier 2908060
