Phoenix MACX-MR-C-10-monitoring relay 1336510, current monitoring relay, 24VAC/DC... 240VAC/DC generous power supply, with adjustable threshold, response delay, and can be configured to select functions.
| Product Type | Current monitoring relay |
| Mode of operation | closed or open circuit |
| insulation characteristics: railway industry standard | |
| Overvoltage Category | III |
| pollution level | 3 |
| Rated impulse withstand voltage | 6 kV |
| service life, electrical | about 1x 105times, resistive load 2000V A |
| rated conditions | 15W |
| Main Power Type | single phase |
| Railway Industry Standard | |
| Rated insulation voltage | 600V |
| electrical isolation | |
| electrical isolation | 300V |
| power supply | |
| Supply Voltage Range | 24V AC ... 240V AC -15 % ... +10% |
| 24V DC ... 240V DC -25 % ... +30% | |
| Rated power consumption | 15 VA (1.5 W) |
| Enter Name | Measurement Input |
| measured value | DC,AC sinusoidal (40 ... 500Hz) |
| Input current range | 0 A AC/DC ... 10 A AC/DC |
| Overload | 15 A AC/DC |
| input current | 5 mΩ |
| Frequency Range | 48Hz ... 400Hz |
| maximum temperature coefficient | 0.05 %/K |
| Response Delay Setting Range | 0 s ... 99.9 s |
| Function | under current |
| Overcurrent | |
| window | |
| basic accuracy | 1% (>1A,± 10mA (0…1A)) |
| repeat accuracy | 0.5 percent |
| Recovery Time | 200 ms |
| switching | |
| Contact Type | 2 floating transfer contacts |
| Contact Material | AgSnO2 |
| maximum switching voltage | 250V AC |
| Maximum power rating (resistive load) | 2000 VA (8 A/250 V AC) |
| output fuse | 8 A (fast fuse) |
| Connection Mode | screw connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm ... 0.6 Nm (5 lb in ...7 lb in) |
Phoenix MACX-MR-C-10-Monitoring Relay 1336510
