Phoenix AXL F DO8/2 2A 1H-digital quantity module 2688381,Axioline F, digital quantity output module, digital output: 8,24V DC,2 A, connection technology: 2-wire system, local bus transmission rate: 100 Mbps, Protection level: IP20, including bus basic module and Axioline F connector

width 35mm
height 126.1mm
depth 54mm
Notes on dimensional data using TH 35-7.5 rails (as EN60715).

Application Description
Application Description for industrial applications only

Axioline F Local Bus
interfaces 2
Connection Mode Bus Base Module
transmission speed 100 Mbps

Module
Hex ID Encoding None
Input Address Area 0 Byte
Output Address Area 1 Byte
the required parameter data 1 Byte
6 Byte

digital quantity:
Output Name Digital Output
Connection Mode in-line connection
connection system 2 wire system
outputs 8
protection circuit Short circuit protection for output, overload protection; electronic
output voltage 24V
the maximum output current of each module 16 A max. (Provide external protection; if the total current of 8 A is exceeded, connect the power supply in parallel with the power plug through the two connection points.)
Rated output voltage 24V DC
Minimum load 10 kΩ
is disconnected maximum 1V
is disconnected Maximum 300 & micro;A
load rating, inductive 48 VA max (1.2 H,12 Ω at nominal load)
rated load, indicator light maximum 48W (rated voltage)
Rated load, resistive 48W max. (12 Ω at nominal load)
Switching frequency Maximum 6000 per second (with resistive load rating, up to HW 02)
Max. 10000 per second (for minimum 50 mA load current as of HW 03)
max. 1 second (with inductive load)
max. 4 per second (with nominal lamp load)
reverse voltage against short pulses limited protection up to 0.5 A for 1 s
overload behavior shutdown
Inductor overload action output may be corrupted
signal delay Max. 150 & micro;s (max. HW 02 when ON)
2688310

Phoenix AXL F DO8/2 2A 1H-Digital volume module 2688381

Product Center

PRODUCT CENTER