Phoenix AXL SE DOR2 W 230-Relay module 1105562,Axioline Smart Elements, relay module, relay output: 2 (floating ground), changeover contact, 220V DC,230V AC, protection level: IP20
| width |
14.9mm |
| height |
62.2mm |
| depth |
62mm |
| Application Description |
| Application Description |
for industrial applications only |
| Smart Element Interface |
| interfaces |
1 |
| Connection Mode |
Card Edge Connector |
| transmission speed |
See Systems with Smart Element. |
| to ready |
< 500 ms |
| Module |
| Hex ID Encoding |
None |
| Process Data Channel |
8. |
| Input Address Area |
0 Byte |
| Output Address Area |
1 Byte |
| the required parameter data |
9 Byte |
|
6 Byte |
| relay |
| outputs |
2 (floating) |
| Connection Mode |
in-line connection |
| connection system |
2 wire system |
| Contact Type |
changeover contact |
| switching current |
max. 6 A (max. 250V AC, cos phi = 0.75 ... 0.8) |
| 6 A max (up to 30V DC, normally open contact, universal) |
| 3 A max (up to 30V DC, normally closed contact, universal) |
| Max 580 mA (available for 48V DC) |
| maximum 250 mA (available for 110V DC) |
| maximum 125 mA (can be used for 220V DC) |
| maximum 220 mA DC (125V DC,L/R ≤ 50 ms) |
| Maximum 110 mA DC (250V DC,L/R ≤ 50 ms) |
| On-Off Capacity |
Maximum 1500 VA (AC applications with temperatures up to 55°C, please pay attention to the degradation above this temperature) |
| maximum 180W (maximum 30V DC, normally open contact, universal) |
| maximum 90W (up to 30V DC, normally closed contact, universal) |
| Max. 28W (above 30V DC) |
| For other DC values, see DC Load Limit Curve. |
| switching capacity according to IEC 60947-5-1 |
3 A (24V (AC15)) |
| 3 A (120V (AC15)) |
