Phoenix PLC-OPT-LPE-24DC/48DC/100-timing relay 2903173, single-channel pulse expansion module, input: 24V DC, output: 3 - 48V DC/100 mA, power supply: 24V DC, plug-in connection
| Product Type |
Solid State Relay Module |
| Product Series |
PLC-INTERFACE |
| Application |
pulse broadening |
| Mode of operation |
100% operating factor |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits |
| insulation |
Foundation Isolation |
| Overvoltage Category |
II |
| pollution level |
2 |
| Data Management Status |
| Last data maintenance date |
20.03.2025 |
| rated conditions |
0.07W |
| test voltage (input/output) |
2.5 kVrms(50Hz,1 minute, input/output) |
| Electrical clearance and creepage distance between power supply circuits |
| Rated insulation voltage |
50V DC |
| Rated overvoltage |
0.5 kV |
| Rated control circuit supply voltage US |
24V DC |
| US |
0.8 ... 1.2 |
| Rated control supply current IS |
13 mA (input low, output low) |
| 19 mA (input high, output high) |
| Rated operating voltage UC |
24V DC |
| Rated operating current IC |
3 mA |
| Input Voltage Range |
19.2V DC ... 28.8V DC |
| switch threshold "0" signal, reference Uc |
< 0.4 |
| switch threshold "1" signal, reference Uc |
> 0.8 |
| Status Display |
LED (yellow) |
| Operating voltage display |
Green LED |
| protection circuit |
polarity protection |
| Surge Protection |
| overvoltage protection |
> 33V DC |
| Contact Type |
1 N/O contact |
| Digital Output Design |
electronic |
| Output Voltage Range |
3V DC ... 48V DC |
| limit continuous current |
100 mA |
| overvoltage protection |
> 54V DC |
| Voltage drop at maximum limited continuous current |
< 1V DC |
| output circuit |
3-wire connection, reference ground |
| protection circuit |
polarity protection |
| Surge Protection |
| Airlift |
