Phoenix PLC-RPT- 24UC/21/RW-Relay module 2900318, suitable for PLC-INTERFACE for rail transit applications, including base terminals, using plug-in connection and with plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX:-40°C to 70°C,1 PDT, input voltage 24V DC
Product Type
Relay Module
product series
PLC-INTERFACE
Application
Railway applications
Installation position
Attached to body
Mode of operation
100% operating factor
mechanical life
about 2x 107times
insulation characteristics
Overvoltage Category
III
pollution level
2
Data Management Status
Last data maintenance date
21.03.2025
rated conditions
0.22W
test voltage (coil/contact)
4 kVrms(50Hz,1 min, coil/contact)
Rated insulation voltage
250V AC
Rated overvoltage
6 kV
coil side
Rated input voltage UN
24V DC
Input Voltage Range
18.5V DC ... 33.6V DC
to UNas reference
0.7 ... 1.25
rated voltage ("hot" plug electromagnetic relay)
12V DC
drives and functions
monostable
drive (polarity)
polarization
UN
9 mA
Typical Response Time
4 ms
Typical release time
4 ms
protection circuit
surge protection; freewheeling diode
RCZ filter
various electronic components
Operating voltage display
yellow LED
switching
Contact Type
1 changeover contact
Switch Contact Type
Single contact
Contact Material
AgSnO
maximum switching voltage
250V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250V(L1, L2, L3), the partition PLC-ATP must be used.)
