Phoenix PLC-RSC-230UC/ 1AU/SEN/SO46-relay module 1125984, can resist the PLC-INTERFACE of interference current/voltage on the control side. Including PLC-BSC-230UC/ 1/SEN/SO46 base terminals, using screw connection, with plug-in miniature relay equipped with multi-layer gold-plated contacts, 1 normally open contact, 230V AC input voltage

Product Type Relay Module
Product Series PLC-INTERFACE
Application input function
Mode of operation 100% operating factor
mechanical life 2x 107Switch Times
insulation characteristics: electrical clearance and creepage distance
insulation safety isolation, reinforced insulation
Overvoltage Category III
pollution level 3
Data Management Status
Last data maintenance date 21.03.2025

rated conditions 2.3W
test voltage (coil/contact) 4 kVrms(50Hz,1 min, coil/contact)
electrical clearance and creepage distance
Rated insulation voltage 250V AC
Rated overvoltage 6 kV

coil side
Rated input voltage UN 230V AC
220V DC
Input Voltage Range 179.4V AC ... 264.5V AC (20 °C)
171.6V DC ... 253V DC (20 °C)
rated voltage ("hot" plug electromagnetic relay) 60V DC
mains frequency 50/60Hz
drives and functions monostable
drive (polarity) polarization
UN 8.8 mA (50 Hz)
10 mA (60 Hz)
Typical Response Time 7 ms
Typical release time 20 ms
regular release voltage 80V AC
protection circuit Bridge Rectifier
RC element
Status Display LED (yellow)

switching
Contact Type 1 N/O contact
Switch Contact Type Single contact
Contact Material AgSnO, hard gold plating
maximum switching voltage 30V AC
36V DC
Minimum Switching Voltage 100 mV (at 10 mA)
limit continuous current 50 mA
Maximum impact current 50 mA
minimum switching current 1 mA (24 V)
short-circuit current 200 A (condition short-circuit current)
Maximum power rating (resistive load) 1.2W (24V DC)
Minimum on-off capacity 0.12W
output fuse 4 A gL/gG NEOZED
2966294

Phoenix PLC-RSC-230UC/ 1AU/SEN/SO46-Relay module 1125984

Product Center

PRODUCT CENTER