Phoenix PLC-V8/FLK14/IN/M-system connection 2304115,V8 adapter for 8 x PLC-INTERFACE (6.2mm), controller: PLC system wiring of input card, connection 1: IDC/FLK pin 1x 14-position, connection 2: in-line connection (can be snap to 8x PLC-INTERFACE terminals), connection 3: screw connection 1x 2-position, number of channels: 8, control logic: minusschaltend
| Product Type | Interface Module |
| Product Series | PLC-INTERFACE |
| Bits | 14 |
| Channels | 8 |
| insulation characteristics: electrical clearance and creepage distance | |
| insulation | Functional insulation |
| Overvoltage Category | II |
| pollution level | 2 |
| Operating voltage range | 18V DC ... 33.6V DC |
| current (per branch) | ≤ 1 A |
| current (power) | ≤ 3 A |
| electrical clearance and creepage distance | |
| Rated insulation voltage | 50V |
| Rated overvoltage | 0.5 kV (1.2 / 50 μs) |
| Applicable I/O Card | 6ES7521-1BH50-0AA0 |
| Supported Controllers ABB S800 I/O | |
| Applicable I/O Card | DI814 |
| Supported Controllers EMERSON DeltaV | |
| Applicable I/O Card | VE4001S2T2B3 Series 2 |
| VE4001S5T2B5 | |
| VE4001S2T2B5 | |
| Supported Controllers MITSUBISHI MELSEC Q | |
| Applicable I/O Card | QY41P |
| QY42P | |
| QH42P | |
| Supported Controller MITSUBISHI MELSEC L | |
| Applicable I/O Card | LY41NT1P |
| LY42NT1P | |
| Interface 1 (Control Layer) | |
| connection meets standards | IEC 60603-13 |
| Connection Mode | IDC/FLK pin |
| connection quantity | 1 |
| Bits | 14 |
| Insertion/unplugging cycle | > 50 |
| needle pitch | 2.54mm |
| interface 2 (field side) | |
| Connection Mode | in-line connection |
| Considerations | can be snapped onto 8x PLC-INTERFACE terminals |
Phoenix PLC-V8/FLK14/IN/M-System Connection 2304115
