Phoenix MCR-SGA-4/6-DC-stress meter/load cell amplifier 5604058, signal conditioner for stress meter/load cell
| Product Type | isolation amplifier |
| power supply | |
| Supply Voltage Range | 11V DC ... 30V DC |
| Typical current consumption | 100 mA |
| Maximum current consumption | 250 mA (350W, full bridge at 10V excitation) |
| signal | |
| Input Description | Excitation voltage |
| voltage input signal | 1.25V ... 12V |
| Maximum current input signal | 100 mA |
| protection circuit | Short circuit protection and thermal protection |
| input impedance | 10 GΩ |
| Bridge resistance | 120 Ω ... 20000 Ω |
| gain range | 1V ... 2000V (10 steps) |
| Sensor Input Range | 0.1 mV ... 200 mV |
| signal | |
| voltage output signal | 0V ... 5V |
| 0V ... 10V | |
| 0V ... 10V | |
| -5V ... 5V | |
| current output signal | 4 mA ... 20 mA |
| Connection Mode | plug-in COMBICON screw terminal block |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| width | 22.5mm |
| height | 99mm |
| depth | 111mm |
| environmental conditions | |
| ambient temperature (operation) | -25°C ... 70°C |
| ambient temperature (storage/transport) | -40°C ... 85°C |
| elevation | 3300 m (above sea level) |
| Allowable humidity (operating) | 10%... 90% |
Phoenix MCR-SGA-4/6-DC-Stress Tester/Load Sensor Amplifier 5604058
