Phoenix MCR-SL-D-FIT-digital display meter 2864024,MCR digital display meter, used for frequency, pulse and time measurement and display, 6-digit display
| Product Type | Digital Display |
| configuration | Keyboard |
| Function | |
| configuration | Keyboard |
| Power | |
| Supply Voltage Range | 10V DC ... 30V DC |
| Maximum current consumption | max. 40 mA |
| measurement: | |
| Reset input | Set function at set value or zero point |
| valid input source | NPN/PNP Transistor Output, Floating Relay Contacts |
| polarity | can program all inputs together |
| impact waveform | any (Schmitt trigger input), the maximum frequency of the 1:1 rectangular pulse |
| pulse time | minimum 5 & micro;s |
| input frequency | max. 60 kHz (CntDir) |
| max. 25 kHz (up-down/up-up/quad 1/quad 2) | |
| 15 kHz max ((Quad 4)) | |
| signal | |
| signal level "1" signal | 0.6 x UB... 30V DC |
| signal level "0" signal | 0V DC ... 0.2 x UB |
| Toggle Level "1" Signal | 4V DC ... 30V DC |
| toggle level "0" signal | 0V DC ... 2V DC |
| input voltage | 10 kΩ |
| measurement rate | 0.1s-1/ 0. 5S-1 |
| switching: transistor | |
| maximum switching voltage | 30V DC |
| maximum switching current | 10 mA |
| signal | |
| Display Bits | 6 |
| Display | 7 segment LED;8mm; red |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.14 mm² ... 1 mm² |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 26 ... 16 |
| width | 48mm |
| height | 24mm |
| depth | 68mm |
Phoenix MCR-SL-D-FIT-digital display table 2864024
