Phoenix TTC-6-MOV-D-24DC-PT-I-surge protector 2906859, medium surge protection, built-in status indicator, used for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
| Product Type | measurement and control technology |
| Product Series | TERMITRAB complete |
| IEC Category | C1 |
| C2 | |
| C3 | |
| type | rail mounting module, monolithic |
| Surge protection fault alarm | with visual status indication window |
| line pairs per module | 1 |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated voltage UN | 24V DC |
| Connection Mode | in-line connection |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 6.2mm |
| height | 92mm |
| depth | 69.5mm (7.5mm with DIN rail) |
| color | gray (RAL 7042) |
| flame retardant rating to UL 94 | V-0 |
| insulation material | PBT |
| Shell Material | PBT |
| Mechanical parameters | |
| Open Side Panel | is |
| movement direction | Line-Line |
| Maximum continuous voltage Uc | 30V DC |
| 21V AC | |
| Rated current | 10 A (60 °C) |
| UC, the effective working current IC | ≤ 100 µA |
| Nominal discharge current In(8/20) & micro;s (core-core) | 2 kA |
| voltage protection level Up(core-core) | ≤ 110V (C1 - 700 V/350 A) |
| ≤ 160V (C2 - 4 kV) | |
| ≤ 80V (C3 - 25 A) | |
| response time tA(core-core) | ≤ 25 ns |
| input attenuation AE, symmetric. | Typical 0.3 dB (≤ 60 kHz/150 Ω) |
| cut-off frequency fg(3 dB),150 Ω symmetric system | Typical 200 kHz |
| capacitance (core-core) | 10 nF |
| the resistance of each path | ≤ 100 mΩ |
| Surge protection fault alarm | with visual status indication window |
| Impact tolerance (line-line) | C1 - 350 A |
| C2 - 2 kA | |
| C3 - 25 A |
Phoenix TTC-6-MOV-D-24DC-PT-I-Surge Protector 2906859
