Phoenix DEK-OE- 5DC/ 24DC/100 KHZ-solid state relay terminal 2964270, input solid state relay, transmission frequency: 100 kHz, with LED and protection circuit in input and output circuit, input: 5V DC, output: 4 - 30V DC/50 mA
| Product Type | Solid State Relay Module |
| Product Series | DEK |
| Application | 100 kHz input optocoupler |
| Mode of operation | 100% operating factor |
| insulation characteristics | |
| insulation | Foundation Isolation |
| Overvoltage Category | II |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 19.03.2025 |
| test voltage (input/output) | 2.5 kV AC (input/output) |
| Rated input voltage UN | 5V DC |
| relative to UNinput voltage range | 0.8 ... 1.2 |
| Input Voltage Range | 4V DC ... 6V DC |
| switch threshold "0" signal, reference UN | ≤ 0.4 |
| switch threshold "1" signal, reference UN | ≥ 0.8 |
| UN | 7 mA |
| Typical Response Time | 1.5 µs |
| Typical closing time | 2 µs |
| Operating voltage display | yellow LED |
| protection circuit | polarity protection; polarity protection diode |
| Surge Protection | |
| sending frequency | 100 kHz |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Output Voltage Range | 4V DC ... 30V DC |
| limit continuous current | 50 mA |
| quiescent current | 4.3 mA |
| Voltage drop at maximum limited continuous current | ≤ 0.5V DC |
| output circuit | 3-wire connection, reference ground |
| protection circuit | Surge protection; Suppressor diode |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm |
| width | 6.2mm |
| height | 80mm |
| depth | 56mm |
Phoenix DEK-OE- 5DC/ 24DC/100KHZ-Solid State Relay Terminal 2964270
