Phoenix FIL-1S-1-1A-230AC-UT-EMC filter 1292329, electromagnetic compatibility filter (power filter) is suitable for single-phase AC and DC systems (rated voltage: up to 230V AC, up to 220V DC), can be installed on NS 35, rated current: 1 A
Product Type
interference suppression filter
type
rail mounting module, monolithic
Bits
2
Electrical characteristics
Rated frequency fN
50Hz (60 Hz)
Rated voltage UN
230V AC (TN-S/TT)
230V AC (IT, L-L)
120V AC (TN-S/TT)
120V AC (IT, L-L)
220V DC
rated voltage (UR )
250V AC
250V DC
Connection Data
Connection Mode
screw connection
thread
M3
Tightening torque
0.5 Nm
Flexible Wire Cross Section
0.2 mm² ... 2.5 mm²
Rigid conductor cross section
0.2 mm² ... 2.5 mm²
Attachable Guide Cross Section AWG
24 ... 12
Dimensions
Dimensional drawing
width
27mm
height
99mm
depth
99.5mm
Material Specification
color
gray (RAL 7042)
light gray (RAL 7035)
flame retardant rating to UL 94
V-0
Shell Material
PC-GF10
mechanical characteristics
Mechanical parameters
Open Side Panel
No
protection circuit
Rated frequency fN
50Hz (60 Hz)
Rated current
1 A (50 °C)
Residual Flow IPE
≤ 0.2 mA
input attenuation AE, symmetric.
> 65 dB (50 Ω / 1 MHz)
input attenuation AE, asymmetric.
> 45 dB (50 Ω / 1 MHz)
Capacity
2x 100 nF (X2)
2x 2.2 nF (Y2)
serial inductance
2x 5.6 mH (with current compensation)
Rated short-circuit current ISCCR
10 kA AC
6 kA DC
1 A AC/DC (FF, gR)
1 A AC (MCB B)
filter data
discharge resistance
940 kΩ
environment and real conditions
environmental conditions
protection level
IP20
ambient temperature (operation)
-40°C ... 70°C (depending on decay curve)
ambient temperature (storage/transport)
-40°C ... 70°C
ambient temperature (assembly)
-5°C ... 70°C
elevation
≤ 2000 m (amsl)
Allowable humidity (operating)
5%... 95%
Impact Force (Operation)
15g (half sine/11 ms/ 3x ± X,± Y, ± Z)
vibration (operation)
DNVGL-CG-0339 class A
