Phoenix OPT- 5DC/ 24DC/ 5-micro solid state relay 2982113, plug-in micro solid state relay, power solid state relay, 1 normally open contact, input: 5V DC, output: 3 - 33V DC/5 A
| Product Type |
Single-phase solid-state relay |
| Mode of operation |
100% operating factor |
| Insulation Characteristics: Standards/Regulations |
| insulation |
Foundation Isolation |
| Overvoltage Category |
III |
| pollution level |
2 |
| Data Management Status |
| Last data maintenance date |
19.03.2025 |
| rated conditions |
0.05W |
| test voltage (input/output) |
2.5 kV (50Hz,1 minute, input/output) |
| Standards/Regulations |
| Rated insulation voltage |
100V DC |
| Rated input voltage UN |
5V DC |
| relative to UNinput voltage range |
0.8 ... 1.2 |
| Input Voltage Range |
4V DC ... 6V DC |
| switch threshold "0" signal, reference UN |
0.15 |
| switch threshold "1" signal, reference UN |
0.5 |
| UN |
9 mA |
| Typical Response Time |
10 µs |
| Typical closing time |
400 µs |
| protection circuit |
polarity protection; polarity protection diode |
| sending frequency |
300Hz |
| Contact Type |
1 N/O contact |
| Digital Output Design |
electronic |
| Rated output voltage |
24V DC |
| Output Voltage Range |
3V DC ... 33V DC |
| limit continuous current |
5 A (see temperature load curve) |
| Maximum impact current |
15 A (10 ms) |
| overvoltage protection |
> 33V DC |
| Voltage drop at maximum limited continuous current |
≤ 200 mV |
| output circuit |
2-wire connection, floating |
| protection circuit |
polarity protection; polarity protection diode |
| Surge Protection |
| Dimensional drawing |
|
| width |
12.7mm |
| height |
29mm |
| depth |
15.7mm |
| color |
black (RAL 9005) |
| flame retardant rating to UL 94 |
V0 (housing) |
| environmental conditions |
| protection level |
RT III |
| ambient temperature (operation) |
-25°C ... 60°C |
| ambient temperature (storage/transport) |
-25°C ... 70°C |
