Phoenix PSI-MOS-DNET/FO 850 E-FO converter 2313999,FO converter, built-in optical signal diagnostic function, used for 1000kbps DeviceNet™, CAN, CANopen, terminal equipment, interface: 1xCAN, 1x alarm, 1xFO(B-FOC),850nm, used for PCF/glass fiber (multimode)
| Product Type |
Media Converter |
| product series |
PSI-MOS |
| MTTF |
831 years (SN 29500 standard, temperature 25°C, duty cycle 21%) |
| 378 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%) |
| 155 years (SN 29500 standard, temperature 40°C, duty cycle 100%) |
| MTBF |
253 years (Telcordia standard, temperature 25°C,21% operation cycle (5 days a week, 8 hours a day)) |
| 38 years (Telcordia standard, 40°C,34.25% cycle (5 days a week, 12 hours a day)) |
| electrical isolation |
VCC // CAN |
| rated conditions |
3.12W |
| test voltage data interface/power supply |
1.5 kVrms(50 Hz,1 min) |
| Power |
| Supply Voltage Range |
11V DC ... 30V DC (via plug-in COMBICON screw terminal block) |
| Rated supply voltage |
24V DC |
| Typical current consumption |
130 mA (24V DC) |
| Maximum current consumption |
≤ 2 A (via DIN rail connector when running in connection site) |
| Function |
| diagnostics and status indicators |
LED indicators: VCC (supply voltage), NET(Mod/Net status), fiber signal (fiber signal quality), ERR (fiber break, fiber) |
| switching |
| Output Name |
relay output |
| outputs |
1 |
| Contact Type |
N/O contacts |
| Minimum Switching Voltage |
11V DC |
| maximum switching voltage |
30V DC |
| limit continuous current |
500 mA |
| Power |
| Tightening torque |
0.56 Nm ... 0.79 Nm |
| -bit distortion, input |
± 35% (allowed) |
| -bit distortion output |
< 6.25% |
| signal |
CAN |
| CANopen® |
| DeviceNet™ |
| data: optical fiber |
| Channels |
1 |
| minimum transmission power |
-17.6 dBm (50/125 µm) |
| -14.6 dBm (62.5/125µm) |
| -4 dBm (200/230 µm) |
| Transfer Protocol |
Transparent transport protocol for CAN interface |
| Connection Mode |
B- FOC (ST®) |
| wavelength |
850 nm |
| Minimum Receiving Sensitivity |
-29 dBm (50/125 µm) |
| -29 dBm (62.5/125µm) |
| -28.1 dBm (200/230 µm) |
| transmission medium |
PCF fiber |
| multimode glass fiber |
| data: CAN interface, ISO/IS 11898 compliant, for DeviceNet™, CAN, CANopen® |
| transmission speed |
≤ 1 MBit/s (configurable with DIP switch) |
| Connection Mode |
plug-in COMBICON screw terminal block |
| Channels |
2 (CAN_High / CAN_Low) |
| Transmission Length |
≤ 5000 m (depending on transmission rate and transport protocol used) |
| INTERBUS equipment quantity |
≤ 64 (each potential section) |
| ≤ 63 (DeviceNet™, logically addressable) |
| ≤ 128 (CANopen®, logically addressable) |
| terminal resistance |
124 Ω (integrated and ready to switch) |
| single wire/wiring point, rigid |
0.2 mm² ... 2.5 mm² |
| single wire/wiring point, flexible |
0.2 mm² ... 2.5 mm² |
| AWG stranded wire, flexible |
14 |
