Phoenix ELR W3- 24DC/500AC- 9I-hybrid motor starter 2297057, hybrid motor starter, used for reverse starting three-phase AC motors, up to 500V AC,9 A output current, 24V DC control voltage, Adjustable overload disconnection, emergency shutdown function to SIL 3/PL e and screw connection.
Product Type
hybrid motor starter
Product Series
CONTACTRON
Mode of operation
100% operating factor
phase number
3
Motor Starter Type
reversible starter
Switching frequency
≤ 2Hz (depending on load)
rated conditions
13.5W
Switching frequency
≤ 2Hz (depending on load)
Maximum power loss
14.6W
minimum power loss
1.1W
Power
Rated control circuit supply voltage US
24V DC
Control Supply Voltage Range
19.2V DC ... 30V DC
Rated control supply current IS
40 mA
protection circuit
surge protection
polarity protection
insulation characteristics
Rated insulation voltage
500V
Rated overvoltage
6 kV
Overvoltage Level
III
pollution level
2
control input and control supply voltage and insulation characteristics from auxiliary circuit to main circuit
safety insulation (IEC 60947-1) for operating voltages ≤ 300V AC
operating voltage 300V AC ... 500V AC (IEC 60947-1)
control input and control supply voltage to auxiliary circuits
safety insulation (IEC 60947-1),≤ 300V AC in auxiliary circuits
control
Enter Name
Control Input Right/Left
Rated operating voltage UC
24V DC
Trigger voltage range
19.2V DC ... 30V DC
Rated operating current IC
5 mA
Switch Threshold
9.6V ("0" signal)
19.2V ("1" signal)
switch level
< 5V DC (for emergency stop)
Typical Response Time
< 35 ms
Typical closing time
< 40 ms
AC output
Rated operating voltage Ue
500V AC
Operating voltage range
42V AC ... 550V AC
Rated operating current Ie
9 A (AC-51)
6.5 A (AC-53a)
mains frequency
50/60Hz
Load current range
1.5 A ... 9 A (see decay curve)
action characteristics according to IEC 60947-4-2
Class 10A
cooling time
20 min (for automatic reset)
leakage current
0 mA
residual pressure
< 0.5V
surge current
100 A (t = 10 ms)
protection circuit
surge protection
Confirm Output
Considerations
confirmation: floating transfer contact, signal contact
Contact Type
1 changeover contact
switching capacity according to IEC 60947-5-1
3 A (230 V, AC15)
2 A (24V (DC13))
residual pressure
< 0.5V
control loop
Connection Mode
screw connection
stripping length
8mm
thread
M3
Rigid conductor cross section
0.2 mm² ... 2.5 mm²
Flexible Wire Cross Section
0.2 mm² ... 2.5 mm²
Attachable Guide Cross Section AWG
24 ... 14
Tightening torque
0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
Load Circuit
Connection Mode
screw connection
stripping length
8mm
thread
M3
Rigid conductor cross section
0.2 mm² ... 2.5 mm²
Flexible Wire Cross Section
0.2 mm² ... 2.5 mm²
Attachable Guide Cross Section AWG
24 ... 14
Tightening torque
0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
2900421
넳넲
Phoenix ELR W3- 24DC/500AC- 9I-Hybrid Motor Starter 2297057
