| Overview |
| working voltage |
10V DC ... 30V DC |
| Rated voltage |
12V DC |
| 24V DC |
| Nominal operating current IN |
45 A DC (total current inlet) |
| Rated overvoltage |
0.5 kV |
| Breaking method |
E (Electronic) |
| dielectric strength |
35V DC (load circuit) |
| efficiency |
> 99% |
| closed-circuit current I0 |
Typical 9 mA (no load at 24V) |
| power consumption |
Typical 0.22W (no load at 24V) |
| < 1.5W (in normal operation at 24V and 45 A) |
| temperature attenuation |
45 A (total current at 40°C) |
| 30 A (total current at 65°C) |
| MTBF (IEC 61709, SN 29500) |
18886912.65 h (25°C, 21% load) |
| 5907048.64 h (40°C at 34.25% load) |
| 933563.97 h (at 40°C, 100% load) |
| voltage drop |
0.03V (at 45 A) |
| Load Circuit |
| undervoltage shutdown |
≤ 9.2V DC (active) |
| ≥ 10.2V DC (passive) |
| Overvoltage shutdown |
≥ 30.5V DC (active) |
| ≤ 29.5V DC (passive) |
| Reset |
| Input Voltage Range |
7V DC ... 30V DC (using falling edge reset) |
| power consumption |
Typical 0.5 mA (24V DC) |
| pulse length |
≥ 50 ms |
| stripping length |
8mm |
| Rigid conductor cross section |
0.2 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG |
24 ... 16 |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve |
0.2 mm² ... 0.75 mm² |
| flexible conductor cross-section with cold press head without insulation sleeve |
0.2 mm² ... 1.5 mm² |
| Status Output |
| output voltage |
maximum 30V DC (no fault, input voltage ± 5%) |
| 0V DC (error) |
| output current |
max. 20 mA |
| stripping length |
8mm |
| Rigid conductor cross section |
0.2 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG |
24 ... 16 |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve |
0.2 mm² ... 0.75 mm² |
| flexible conductor cross-section with cold press head without insulation sleeve |
0.2 mm² ... 1.5 mm² |
| Status Output |
| output voltage |
Maximum 30V DC (at least one channel input voltage ± 5% when I > 80%) |
| output current |
max. 20 mA |
| stripping length |
8mm |
| Rigid conductor cross section |
0.2 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG |
24 ... 16 |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve |
0.2 mm² ... 0.75 mm² |
| flexible conductor cross-section with cold press head without insulation sleeve |
0.2 mm² ... 1.5 mm² |
