Phoenix PSR-SPP- 24UC/URM/3X1/3X2-coupling relay 2981842, safety coupling relay, with mechanical interlocking contacts, 3 normally open contacts, 3 normally closed contacts, pluggable in-line terminal, Width: 22.5mm
| Product Type |
coupling relay |
| Product Series |
PSRclassic |
| Application |
Safety Shutdown |
| high requirements |
| low requirements |
| control |
Single and Dual Channel |
| mechanical life |
10x 106Switch Times |
| Relay Model |
Electromechanical relay with mechanical interlocking contacts according to IEC/EN 61810-3 |
| insulation characteristics |
| Overvoltage Level |
III |
| pollution level |
2 |
|
| restart time |
< 1 s (start-up time) |
| rated conditions |
6.11W (in UB= 26.4V DC,US= 24 V, IS= 45 mA,n = 1, IL² = 48 A²,Rcontact= When 0.1,) |
| Rated operating mode |
100% Eligible |
| Rated insulation voltage |
250V |
| rated overvoltage/insulation |
4kV/basic safety isolation (6kV enhanced safety isolation between input loop and normally open safety contact output.) |
| Power |
| Rated control circuit supply voltage US |
20.4V AC/DC ... 26.4V AC/DC |
| Overview |
| Rated control circuit supply voltage US |
24V AC/DC -15 % / +10% |
| US |
Typical 1.08W |
| Rated control supply current IS |
Typical 45 mA |
| Input Voltage Range |
20.4V AC/DC ... 26.4V AC/DC |
| Impulse current |
Typical 350 mA DC (& Delta;t < 1 & micro;s Us) |
| Typical 350 mA AC (& Delta;t = 2 ms Us) |
| Typical startup time (Us) |
Typical 15 ms (when controlled via A1) |
| Typical Release Time |
Typical 15 ms (when controlled via A1) |
| Recovery Time |
< 500 ms |
| Maximum switching frequency |
0.5Hz |
| protection circuit |
Surge protection; Suppressor diode |
| Operating voltage display |
1 x LED (green) |
| Contact Type |
3 normally open safety contact outputs |
| 3 fault diagnosis output contacts |
| Contact Material |
AgSnO2 |
| maximum switching voltage |
230V AC/DC (note load curve) |
| Minimum Switching Voltage |
5V AC/DC |
| limit continuous current |
6 A (N/O contact) |
| 6 A (normally closed contact) |
| Maximum impact current |
8 A |
| Minimum impulse current |
10 mA |
| the square of the total current value |
48 A2 |
| Maximum power rating (resistive load) |
more values, see Load Curve |
| Maximum power rating (inductive load) |
48W (normally open contact, 24V DC, & tau; = 40 ms) |
| 40W (normally open contact, 48V DC, & tau; = 40 ms) |
| 36W (normally open contact, 60V DC, & tau; = 40 ms) |
| 35W (normally open contact, 110V DC, & tau; = 40 ms) |
| 33W (normally open contact, 220V DC, & tau; = 40 ms) |
| On-Off Capacity |
50 mW minimum |
| output fuse |
10 A gL/gG (N/O contact) |
| 4 A gL/gG (normally open contact for low demand applications) |
| 6 A gL/gG (normally closed contact) |
