Phoenix CN-LAMBDA/4-2.25-SB-surge protector 2801056, the adapter adopts Lambda/4 surge protection technology for the protection of coaxial signal interface. Connection: N type pin connector/hole connector
| Product Type | Transceiver System |
| IEC Category | C2 |
| C3 | |
| D1 | |
| VDE requirement level | C2 |
| C3 | |
| D1 | |
| type | Protection Adapter |
| Bits | 1 |
| Surge protection fault alarm | None |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Connection Mode | Type-N connector, 50 Ω |
| Tightening torque | 1.5 Nm |
| Dimensional drawing | |
| width | 25mm |
| height | 77.5mm |
| length | 81.5mm |
| color | NICKEL |
| black (RAL 9005) | |
| Shell Material | HPb59-1 |
| Shell surface material | Cu-Sn-Zn |
| Material Contact Surface | Au |
| Core Material | QSn6.5-0.1 |
| Core Surface Material | gold |
| Insulator Material | PTFE |
| spring contact material | QSn6.5-0.1 |
| Mechanical parameters | |
| Open Side Panel | No |
| Direction of action | Line-Shield/Earth Ground |
| Rated current | 5 A (25 °C) |
| Rated discharge current In(8/20)& micro;s (core-ground) | 50 kA |
| Nominal discharge current In(8/20)& micro;s (core/shield) | 50 kA |
| pulse discharge current Iimp(10/350) µs | 20 kA |
| Total inrush current (8/20)& micro;s | 60 kA |
| Total overcurrent (10/350) & micro;s | 20 kA |
| Total discharge current ITotal(8/20) µs | 60 kA |
| Maximum discharge current Imax(8/20) & micro;s (core-ground) | 60 kA |
| Maximum discharge current Imax(8/20) & micro;s (core-shield) | 60 kA |
| Output voltage limit 1 kV/& micro;s (core-ground) peak | ≤ 1V |
| Output voltage limit 1 kV/& micro;s (core-shield) peak | ≤ 1V |
| Output voltage limit 1 kV/& micro;s (core-ground) static | ≤ 1V |
| voltage protection level Up(line-ground) | ≤ 5V (C1 - 1 kV / 500 A) |
| ≤ 25V (C2 - 10 kV / 5 kA) | |
| ≤ 15V (6 kV / 3 kA) | |
| voltage protection level Up(core-shield) | ≤ 5V (C1 - 1 kV / 500 A) |
| ≤ 25V (C2 - 10 kV / 5 kA) | |
| ≤ 15V (6 kV / 3 kA) | |
| input attenuation AE, asymmetric. | ≤ 0.2 dB (50 Ω) |
| Frequency Range | 0.8 GHz ... 2.25 GHz |
| 50 Ω system | Typical 1.20 |
| maximum 1.25 | |
| Allowable high-frequency power Pmax,VSWR = xx(50 ohm system) | ≤ 500W |
| ≤ 4 kW (peak) | |
| Surge protection fault alarm | None |
| Impact resistance (line-ground) | C1 - 1 kV / 500 A |
| C2 - 10 kV / 5 kA | |
| D1 - 2.5 kA |
| environmental conditions | |
| protection level | IP68 |
| ambient temperature (operation) | -40°C ... 85°C |
| elevation | 2000 m |
| VDE requirement level | C2 |
| C3 | |
| D1 |
Phoenix CN-LAMBDA/4-2.25-SB-Surge Protector 2801056
