Phoenix FLT-SEC-T1 + T2-2C-350/25-FM - 1+2 special combined surge protector 2905467, plug-in lightning protection protector combination, meet the requirements of Class 1+2/I + II, used for dual-phase power supply network, zero-ground integration (L1, L2, PEN).
| Product Type | combination surge protector |
| product series | SEC Family |
| IEC Category | I + II |
| I | |
| T1 + T2 | |
| T1 | |
| EN Type | T1 + T2 |
| T1 | |
| IEC power supply system | TN-C |
| type | DIN rail module, split, detachable |
| Bits | 2 |
| Surge protection fault alarm | visual status indication window and remote alarm contact |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| indicator/remote signaling | |
| Connection Name | Remote alarm contact |
| switching function | changeover contact |
| Nominal operating voltage | 12V AC ... 250V AC |
| 125V DC (200 mA DC) | |
| operating current | 10 mA AC ... 1 A AC |
| 1 A DC (30V DC) | |
| Connection Mode | screw connection terminal |
| thread | M5 |
| Tightening torque | 4.5 Nm |
| stripping length | 18mm |
| Flexible Wire Cross Section | 2.5 mm² ... 35 mm² |
| Rigid conductor cross section | 2.5 mm² ... 35 mm² |
| Connectable Guide Cross Section AWG | 13 ... 2 |
| Connection Mode | fork cable end |
| Flexible Wire Cross Section | 1.5 mm² ... 16 mm² |
| Remote alarm contact | |
| Connection Mode | COMBICON in-line/screw connection |
| thread | M2 |
| Tightening torque | 0.25 Nm |
| stripping length | 7mm |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Connectable Guide Cross Section AWG | 28 ... 16 |
| Dimensional drawing | |
| width | 71.2mm |
| height | 95.2mm |
| depth | 74.5mm |
| Horizontal stitch pitch | 4 Zoning |
| color (pin connector) | light gray (RAL 7035) |
| color (basic element) | gray (RAL 7042) |
| flame retardant rating to UL 94 | V-0 |
| material | 600 |
| insulation material | PA6.6-FR 20% GF |
| PBT-FR | |
| Material Group | I |
| Shell Material | PA 6.6-FR 20 % GF |
| PBT-FR |
| Mechanical parameters | |
| Open Side Panel | No |
| protection channel | L-PEN |
| movement direction | 2L-N/PE |
| Rated voltage UN | 240/415V AC (TN-C) |
| Rated frequency fN | 50Hz (60 Hz) |
| Maximum continuous operating voltage UC | 350V AC |
| Rated load current IL | 125 A (< 55 °C) |
| Nominal discharge current In(8/20)µs | 25 kA |
| impulse discharge current (10/350)& micro;s, charging | 12.5 |
Phoenix FLT-SEC-T1 T2-2C-350/25-FM - 1 Class 2 Special Combined Surge Protector 2905467
