Phoenix FL SFP FX SM-Media Module 2891082, small pluggable modules provide optical fiber interface, data transmission speed up to 100 Mbps, wavelength 1310 nm (long).
| width | 13.7mm |
| height | 8.95mm |
| length | 56.5mm |
| Application Description | |
| Application Description | for industrial applications only |
| Shell Material | metal |
| Installation Type | Insert SFP Slot |
| Ethernet FO | |
| Connection Mode | SFP module, 100 Mbps |
| transmission speed | 100 Mbps |
| Minimum Receiving Sensitivity | -35 dBm |
| receiver | -3 dBm |
| transmission principle | single-mode glass fiber |
| Transmission Length | Typical 40km |
| wavelength | 1310 nm |
| signal LED | depends on Factoryline equipment |
| Channels | 1 (LC single mode) |
| Product Type | SFP Module |
| type | Factoryline device with SFP slot |
| format | SFP (Compact Plug-in Optical Signal Transceiver) |
| basic functions | SFP module as FO port |
| meets MSA requirements |
| Status Display | through Factoryline equipment |
| rated conditions | 0.66W (installed) |
| transmission medium | single-mode glass fiber |
| power supply | |
| supply voltage | 3.3V (via Factoryline switch) |
| Connect power supply | via SFP slot |
| Connection Mode | Insert SFP Slot |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -40°C ... 85°C (non-condensing) |
| ambient temperature (storage/transport) | -40°C ... 85°C (non-condensing) |
| Allowable humidity (operating) | 30%... 95% (non-condensing) |
| Permissible humidity (storage/transportation) | 30%... 95% (non-condensing) |
| vibration (operation) | conforming to IEC 60068-2-6: 5g,150Hz |
| air pressure (operation) | 86 kPa ... 108 kPa (altitude 1500 m) |
| air pressure (storage/transport) | 66 kPa ... 108 kPa (altitude 3500 m) |
| Standard Identification | environmental conditions |
| Standards/Specifications | IEC 61850-3 |
Phoenix FL SFP FX SM-Media Module 2891082
