Phoenix FLT-SEC-P-T1-3C-264/50-FM-1 Class 2 combined surge protector 2907390, plug-in lightning protection surge protector without leakage current, meets the requirements of Class 1/Class I, and is used in 3-phase power supply network to protect grounding and neutral wires in one (L1, L2, L3, PEN).
Product Type
combination type
product series
SEC Family
IEC Category
I / II
T1 / T2
EN Type
T1 / T2
IEC power supply system
TN-C
type
DIN rail module, split, detachable
Bits
3
Surge protection fault alarm
visual status indication window and remote alarm contact
insulation characteristics
Overvoltage Category
III
pollution level
2
Rated frequency fN
50Hz (60 Hz)
indicator/remote signaling
Connection Name
Remote alarm contact
switching function
changeover contact
Nominal operating voltage
12V AC ... 250V AC
125V DC (200 mA DC)
Operating current
10 mA AC ... 1 A AC
1 A DC (30V DC)
Connection Mode
screw connection
thread
M5
Tightening torque
4.5 Nm
stripping length
18mm
Flexible Wire Cross Section
2.5 mm² ... 35 mm²
Rigid conductor cross section
2.5 mm² ... 35 mm²
Connectable Guide Cross Section AWG
13 ... 2
Connection Mode
fork cable end
Flexible Wire Cross Section
1.5 mm² ... 16 mm²
Remote alarm contact
Connection Mode
COMBICON in-line/screw connection
thread
M2
Tightening torque
0.25 Nm
stripping length
7mm
Flexible Wire Cross Section
0.14 mm² ... 1.5 mm²
Rigid conductor cross section
0.14 mm² ... 1.5 mm²
Connectable Guide Cross Section AWG
28 ... 16
Dimensional drawing
width
106.8mm
height
95.2mm
depth
74.5mm (7.5mm with DIN rail)
Horizontal stitch pitch
6 Division
color (pin connector)
light gray (RAL 7035)
color (basic element)
gray (RAL 7042)
flame retardant rating to UL 94
V-0
material
600
insulation material
PA6.6-FR 20% GF
PBT-FR
Material Group
I
Shell Material
PA 6.6-FR 20 % GF
PBT-FR
Mechanical parameters
Open Side Panel
No
protection channel
L-PEN
Direction of action
3L-N/PE
Rated voltage UN
240/415V AC (TN-C)
Rated frequency fN
50Hz (60 Hz)
Maximum continuous operating voltage UC
264V AC
Rated load current IL
125 A (< 55 °C)
Nominal discharge current In(8/20)µs
50 kA
Maximum discharge current Imax(8/20) µs
100 kA
impulse discharge current (10/350)& micro;s, charging
25
impulse discharge current (10/350)& micro;s, specific energy
625 kJ/Ω
2905469
넳넲
Phoenix FLT-SEC-P-T1-3C-264/50-FM - 1 Class 2 Combined Surge Protector 2907390
