Phoenix FLT-SEC-P-T1-2C-350/25-FM-1 Class 2 combined surge protector 2905416, plug-in lightning protection surge protector without leakage current, meets the requirements of Class 1/Class I, and is used for 2-phase power supply network to protect grounding and neutral wires in one (L1, L2, PEN).

Product Type combination type
Product Series SEC Family
IEC Category I / II
I
T1 / T2
T1
EN Type T1 / T2
T1
IEC power supply system TN-C
type DIN rail module, split, detachable
Bits 2
Surge protection fault alarm visual status indication window and remote alarm contact
insulation characteristics
Overvoltage Category III
pollution level 2

Rated frequency fN 50Hz (60 Hz)
indicator/remote signaling
Connection Name Remote alarm contact
switching function changeover contact
Nominal operating voltage 12V AC ... 250V AC
125V DC (200 mA DC)
Operating current 10 mA AC ... 1 A AC
1 A DC (30V DC)

Connection Mode screw connection terminal
thread M5
Tightening torque 4.5 Nm
stripping length 18mm
Flexible Wire Cross Section 2.5 mm² ... 35 mm²
Rigid conductor cross section 2.5 mm² ... 35 mm²
Attachable Guide Cross Section AWG 13 ... 2
Connection Mode fork cable end
Flexible Wire Cross Section 1.5 mm² ... 16 mm²
Remote alarm contact
Connection Mode COMBICON in-line/screw connection
thread M2
Tightening torque 0.25 Nm
stripping length 7mm
Flexible Wire Cross Section 0.14 mm² ... 1.5 mm²
Rigid conductor cross section 0.14 mm² ... 1.5 mm²
Attachable Guide Cross Section AWG 28 ... 16

Dimensional drawing
width 71.2mm
height 95.2mm
depth 74.5mm
Horizontal stitch pitch 4 Zoning

color (pin connector) light gray (RAL 7035)
color (basic element) gray (RAL 7042)
flame retardant rating to UL 94 V-0
material 600
insulation material PA6.6-FR 20% GF
PBT-FR
Material Group I
Shell Material PA 6.6-FR 20 % GF
PBT-FR
2905345

Phoenix FLT-SEC-P-T1-2C-350/25-FM - 1 Class 2 Combined Surge Protector 2905416

Product Center

PRODUCT CENTER