Phoenix PP-RJ-IDC-distribution frame 2703019, distribution frame, RJ45 socket to IDC terminal block, CAT6,10/100/1000 Mbps,DIN rail adapter, IP20, shielded connection using cable clamp
| Product Type |
distribution frame |
| MTTF |
105699 years |
| insulation characteristics |
| Overvoltage Category |
II |
| pollution level |
2 |
| rated conditions |
0W (passive module, no power required) |
| Rated insulation voltage |
85V DC (conforming to EN/IEC 60079-7, Annex H) |
| data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3 |
| serial transmission rate |
10/100/1000 Mbps |
| Frequency Range |
250 MHz |
| Connection Mode |
quick wire stripping-free |
| Connection Method Considerations |
CAT6 |
| Pin Distribution |
1:1 |
| Transmission Length |
100 m (including tail cable) |
| single wire/wiring point, rigid |
0.14 mm² ... 0.34 mm² |
| single wire/wiring point, flexible |
0.14 mm² ... 0.34 mm² |
| AWG stranded wire, flexible |
22 |
| AWG Wire Minimum Cross Section, Flexible |
26 |
| single wire/wiring point, maximum rigid AWG |
22 |
| Single Wire/End Point, Minimum Rigid AWG |
26 |
| wire diameter, including insulation |
1.6mm (terminals with PVC insulation have been tested, insulation of other materials can be provided as required) |
| the connection frequency between wires with the same cross-sectional dimension |
10 |
| transmission medium |
copper cable |
| Rated output voltage |
< 57V DC |
| Maximum output power |
60W |
| Maximum output current |
725 mA (per channel) |
| data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3 |
| Connection Mode |
RJ45 female connector |
| Dimensional drawing |
|
| width |
23.8mm |
| height |
101.3mm |
| depth |
50mm |
| color (shell) |
light gray (RAL 7035) |
| Identification Material (Shell) |
plastic |
| flame retardant rating, according to UL 94 |
V0 |
| Cable outer diameter |
5.5mm ... 6.5mm |
| meets EN 60068-2-6/IEC 60068-2-6 anti-vibration standards |
: 10Hz ... 57Hz,± 3.5mm amplitude, 57Hz ... 150Hz,5g |
| Conforms to EN 60068-2-27/IEC 60068-2-27 impact resistance standards |
: 30g,11 ms, three shocks in each spatial direction |
| continuous impact conforming to EN 60068-2-27/IEC 60068-2-27 |
: 10g,16 m, 1000 shocks in each spatial direction |
| environmental conditions |
| protection level |
IP20 (manufacturer's declaration) |
| ambient temperature (operation) |
-40°C ... 75°C |
| ambient temperature (storage/transport) |
-40°C ... 85°C |
| elevation |
≤ 5000 m (see manufacturer's statement for high altitude operation for limits) |
| ≤ 2000 m (limit for ATEX applications) |
| Allowable humidity (operating) |
10%... 95% (no condensation) |
