Phoenix VAL-MS 120 Class ST-2 surge protector 2807586, Class 2 surge protection connector, using high-power varistor, matched with VAL-OEZ base, with temperature monitoring and optical fault alarm display. Working voltage: 120V AC
| Product Type | Spare Plug |
| product series | VALVETRAB MS |
| IEC Category | II |
| T2 | |
| EN Type | T2 |
| IEC power supply system | TN |
| type | DIN rail module, split, detachable |
| Bits | 1 |
| Surge protection fault alarm | with visual status indication window |
| can test protectors using the CHECKMASTER software tests: | |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| Connection Mode | pluggable |
| Dimensional drawing | |
| width | 17.5mm |
| height | 52.4mm |
| depth | 55.3mm |
| Horizontal stitch pitch | 1 Partition |
| color | black (RAL 9005) |
| flame retardant rating, according to UL 94 | V-0 |
| material | 600 |
| insulation material | PA 6.6 |
| Material Group | I |
| Shell Material | PA 6.6 |
| protection channel | L-N |
| L-PEN | |
| movement direction | 1L-N/PE |
| Rated voltage UN | 120/208V AC (TN) |
| Rated frequency fN | 50Hz (60 Hz) |
| Maximum continuous operating voltage UC | 150V AC |
| Residual Flow IPE | ≤ 0.45 mA |
| Standby power consumption PC | ≤ 70 mVA |
| Nominal discharge current In(8/20)µs | 20 kA |
| Maximum discharge current Imax(8/20) µs | 40 kA |
| Rated short-circuit current ISCCR | 25 kA |
| voltage protection level Up | ≤ 0.9 kV |
| Residual pressure Ures | ≤ 0.9 kV (In) |
| ≤ 0.7 kV (10 kA) | |
| ≤ 0.55 kV (at 5 kA) | |
| ≤ 0.55 kV (at 3 kA) | |
| UT | 175V AC (5 seconds/withstand mode) |
| 230V AC (120 min/safe failure mode) | |
| response time tA | ≤ 25 ns |
| maximum spare fuse with branch wiring | 125 A (gG) |
Phoenix VAL-MS 120 ST-2 class surge protector 2807586
