Phoenix FLK 50-PA/EZ-DR/KS/ 200/YUC-card front adapter 2314299, cast front adapter, with prefabricated round cable, each end has a 50-position plastic European plate slot connector, Used to connect to Yokogawa controller. Cable length: 2.0 m
Product Type
Card Front Adapter
Nominal operating voltage (DC)
≤ 30V DC
Rated operating mode
100% Eligible
current (per path)
≤ 500 mA (released)
Supported Controller YOKOGAWA CS3000 CentumVP
Applicable I/O Card
ADV151
ADV551
Applicable I/O Card
NFDV151
NFDV551
Applicable I/O Card
SDV541
SDV144
SDV521
connection 1
connection meets standards
IEC 60603-13 (compliance)
Connection Mode
Yokogawa,I/O card compatible
connection quantity
1
Bits
50
Tightening torque
0.5 Nm (screw connection)
Insertion/unplugging cycle
> 50
needle pitch
2.54mm
Connection 2
connection meets standards
IEC 60603-13 (compliance)
Connection Mode
Yokogawa,KS compatible
connection quantity
1
Bits
50
Tightening torque
0.5 Nm (screw connection)
Insertion/unplugging cycle
> 50
needle pitch
2.54mm
cable
length
2 m
50X0.14 [PVC]
UL AWM
2464/1061
Bits
50
Shielding
have
Cable Type
50X0.14 [PVC]
Wire Model
prefabricated circular shielded cable
wire structure signal line
7x 0.16mm
AWG, signal wire
26
Wire Cross Section
50x 0.14 mm²
wire diameter, including insulation
1 mm ± 0.03mm
Cable outer diameter
11.00mm ± 0.3mm
outer sheath, material
semi-rigid PVC
outer sheath, color
Grey
Wire Material
tinned copper stranded wire
Cable resistance
≤ 145 Ω/km (at 20°C)
insulation resistance
≥ 20 MΩ*km (20 °C)
minimum bending radius, fixed mounting
114mm
minimum bending radius, mobile installation
205mm
Dynamic Load Capacity (Bending)
Maximum bending times: 5000 (radius ≥ 18x outer diameter)
Halogen-free
No
flame retardant
IEC 60332-1-2 (bare cable)
VDE 0842, Part 332-1-2 (Bare cables)
IEC 60332-3-22 (bare cable)
UL VW-1
CSA FT-1
oil resistance
Resistance to occasional welding chip spatter (bare cable)
Cable Type
cables for connecting modules
2314299
넳넲
Phoenix FLK 50-PA/EZ-DR/KS/ 200/YUC-Card Front Adapter 2314299
