Phoenix REL-MR- 24DC/1IC-single relay 2961341, plug-in miniature power relay, with power contacts for large impulse currents with a peak value of 130 A, 1 normally open contact, input voltage: 24V DC

Product Type Single relay
Mode of operation 100% operating factor
mechanical life 3x 107Switch Times
insulation characteristics
insulation safety isolation, reinforced insulation
Overvoltage Category III
pollution level 3
Data Management Status
Last data maintenance date 19.03.2025

rated conditions 0.41W
test voltage (coil/contact) 5 kV AC (50Hz,1 min, coil/contact)
Rated insulation voltage 250V AC
Rated overvoltage 6 kV

coil side
Rated input voltage UN 24V DC
Input Voltage Range 19.2V DC ... 54V DC
to UNas reference See Graph
drives and functions monostable
drive (polarity) Inpolarity
UN 17 mA
Typical Response Time 8 ms
Typical release time 3 ms
coil resistance 1440 Ω ± 10% (20°C)

switching
Contact Type 1 N/O contact
Switch Contact Type single contact
Contact Material AgSnO
maximum switching voltage 250V AC/DC
Minimum Switching Voltage 12V (100 mA)
limit continuous current 16 A
Maximum impact current 80 A (20 ms)
130 A (peak, capacitive load, 230V AC, 24 μF)
minimum switching current 100 mA (for 12V DC)
Maximum power rating (resistive load) 384W (24V DC)
58W (available for 48V DC)
48W (available for 60V DC)
50W (available for 110V DC)
80W (available for 220V DC)
4000 VA (available for 250V AC)
Minimum on-off capacity 1200 mW
switch capacity 2 A (24V, DC13)
0.2 A (at 110V, DC13)
0.2 A (250V, DC13)
6 A (24V, AC15)
6 A (120V, AC15)
6 A (250V, AC15)
UL 508 Motor Loads 1/2 HP,120V AC (normally open contact)
1 HP, 250V AC (normally open contact)

Connection Mode Plugging/Soldering

Dimensional drawing
width 12.7mm
height 29mm
depth 15.7mm

color white (RAL 9010)

environmental conditions
protection level RT II
ambient temperature (operation) -40°C ... 85°C
ambient temperature (storage/transport) -40°C ... 85°C
elevation ≤ 2000 m
2961312

Phoenix REL-MR- 24DC/1IC-Single Relay 2961341

Product Center

PRODUCT CENTER