Phoenix SUBCON-PLUS-PROFIB/IDC-D-SUB bus connector 2313672,D-SUB connector, 9-position, pin plug, 90 ° cable outlet, bus system: PROFIBUS DP, maximum transmission speed of 12 Mbps, terminal resistance can be connected by sliding switch, pin assignment: 3, 5, 6, 8;IDC terminal connection
| Product Type |
Data plug |
| MTTF |
6706 years (SN 29500 standard, temperature 25°C, duty cycle 21%) |
| 1817 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%) |
| 155 years (SN 29500 standard, temperature 40°C, duty cycle 100%) |
| Pin Distribution |
3, 5, 6, 8 |
| Test Voltage |
50V |
| rated conditions |
0.025W |
| Rated voltage UN |
5V |
| Rated current IN |
100 mA |
| Tightening torque |
... 1.2 Nm |
| D-SUB connection |
| Connection Mode |
D-SUB connector |
| IDC Terminal |
| Connection Mode |
IDC Quick Connect |
| Minimum cross section of rigid conductor |
0.32 mm² |
| Maximum cross section of rigid conductor |
1 mm² |
| flexible lead |
0.32 mm² |
| Flexible lead maximum cross section |
1 mm² |
| Single Wire/End Point, Minimum Rigid AWG |
22 |
| single wire/wiring point, maximum rigid AWG |
18 |
| AWG Wire Minimum Cross Section, Flexible |
22 |
| AWG stranded wire, flexible |
18 |
| bus system |
PROFIBUS DP |
| signal |
PROFIBUS |
| Dimensional drawing |
|
| width |
16.8mm |
| height |
34.8mm |
| Length |
72mm |
| External dimensions |
| Minimum outside diameter |
7.6mm |
| maximum outer diameter |
8.4mm |
| Identification Material (Shell) |
ABS (metal plating) |
| Cable outer diameter |
7.6mm... 8.4mm (bus line incoming) |
