Phoenix EM-EV-CLR-12V-voltage monitoring device 2903246,EV charging lock release can monitor the 12V working voltage of the electric plug lock actuator, send lock and unlock signals, and send unlock pulses to the actuator in the case of working voltage failure.
| Product Type | Voltage monitoring relay |
| Product Series | CHARX control advanced |
| Application | lock-release module, AC charge controller (EU) for commercial applications in case of power failure |
| Mode of operation | Stand-Alone |
| power failure | lock actuator is used to disconnect the charging pile plug and the charging pile socket |
| charging points | 1 |
| charging standard | Class 2 |
| charging mode | mode 3 |
| Charge Controller | |
| charging points | 1 |
| Charging current type | 3-phase AC |
| power failure | lock actuator is used to disconnect the charging pile plug and the charging pile socket |
| Power | |
| supply voltage | 12V DC ±5% |
| Supply Voltage Range | 12V DC ±5% |
| Maximum current consumption | 4 mA (idle) |
| Current carrying capacity | ≤ 4 A |
| digital quantity | |
| Digital quantity input quantity | 1 |
| Frequency Range | 50Hz ... 60Hz |
| Rated power consumption | < 0.5W (no load) |
| Rated current IN | approx. 5 mA |
| Rated input voltage UN | 12V |
| input voltage range U1 | -3V ... 3V (off) |
| input voltage range U2 | -30V ... -10V (locked ON) |
| input voltage range U3 | 10V ... 30V (Unlocked ON) |
| switching | |
| Output Name | relay output OUT +/- |
| Minimum on-off capacity | 46 VA |
| maximum switching voltage | approx. 11.5V (operating voltage/capacitor voltage minus diode voltage ~ 0.5V) |
| maximum switching current | 4 A |
| Current carrying capacity | ≤ 4 A |
| width | 35.6mm |
| height | 90mm |
| depth | 61.00mm |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -25°C ... 60°C |
| ambient temperature (storage/transport) | -25°C ... 60°C |
Phoenix EM-EV-CLR-12V-Voltage Monitoring Equipment 2903246
