Phoenix MT-RS485-surge protector 2762265, rail-mounted surge protection module, used for coarse protection and fine protection of RS-485 interface, installed on NS 35/7.5 rail, shell thickness: 50mm

Product Type Information Technology
IEC Category C2
C3
D1
VDE requirement level C2
C3
D1
type rail mounting module, monolithic
Surge protection fault alarm None
line pairs per module 2

Connection Mode screw connection
thread M3
Tightening torque 0.5 Nm ... 0.6 Nm
Flexible Wire Cross Section 0.2 mm² ... 2.5 mm²
Rigid conductor cross section 0.2 mm² ... 4 mm²
Attachable Guide Cross Section AWG 24 ... 12

Dimensional drawing
width 47.6mm
height 77.5mm
depth 54.9mm

color black (RAL 9005)

Mechanical parameters
Open Side Panel No

movement direction Line-Line & Line-Signal Ground/Shield & Signal Ground/Shield-Earth Ground
Maximum continuous operating voltage UC 12V DC
Rated current 450 mA (25°C)
UC, the effective working current IC ≤ 10 µA
Nominal discharge current In(8/20) & micro;s (core-core) 10 kA
Rated discharge current In(8/20)& micro;s (core-ground) 10 kA
pulse discharge current Iimp(10/350) µs 500 A
Output voltage limit 1 kV/& micro;s (core-to-core) peak ≤ 22V
Output voltage limit 1 kV/& micro;s (core-ground) peak ≤ 600V
Output voltage limit 1 kV/& micro;s (core-core) static ≤ 22V
Output voltage limit 1 kV/& micro;s (core-ground) static ≤ 600V
output voltage limited to 1 kV/& micro;s (line-signal ground) static ≤ 22V
Residual voltage ln,(wire-wire) ≤ 19V
In(line-signal ground) ≤ 19V
voltage protection level Up(core-core) ≤ 22V
voltage protection level Up(Line-Ground) ≤ 600V
voltage protection level Up(line-signal ground) ≤ 22V
response time tA(core-core) 1 ns
response time tA (core-ground) ≤ 100 ns
response time tA (line-signal ground) ≤ 1 ns
input attenuation AE, symmetric. ≤ 0.1 dB (up to 10kHz)
input attenuation AE, asymmetric. 0.8 dB (.1 MHz,50 Ω system)
0.1 dB (10 kHz,600 Ω system)
cutoff frequency fg(3 dB), asymmetric. 50 Ω system (signal ground) 1.3 MHz
cutoff frequency fg(3 dB), asymmetric. 600 Ω in the system (signal ground) 130 kHz
the resistance of each path 4.4 Ω
Surge protection fault alarm None

environmental conditions
protection level IP20
ambient temperature (operation) -40°C ... 60°C
2762265

Phoenix MT-RS485-Surge Protector 2762265

Product Center

PRODUCT CENTER