Phoenix PT 2-TELE-ST-Surge Protector-Plug-in 2838733, surge protection plug, installed on the base, used to protect the two wires of analog telecommunications interface.
| Product Type | Information Technology |
| Product Series | PLUGTRAB PT |
| IEC Category | B2 |
| C1 | |
| C2 | |
| C3 | |
| D1 | |
| type | needle type |
| Bits | 2 |
| Surge protection fault alarm | None |
| line pairs per module | 1 |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated voltage UN | 185V DC |
| 130V AC |
| Connection Mode | pluggable |
| Dimensional drawing | |
| width | 17.7mm |
| height | 45mm |
| depth | 52mm |
| Horizontal stitch pitch | 1 Partition |
| full module width | 17.7mm |
| Full module height | 90mm |
| full module depth | 65.5mm |
| color | black (RAL 9005) |
| COPPER | |
| flame retardant rating, according to UL 94 | V-0 |
| Shell Material | PA 6.6 |
| Mechanical parameters | |
| Open Side Panel | No |
| movement direction | Line-Line & Line-Earth Ground |
| Maximum continuous operating voltage UC | 185V DC |
| 130V AC | |
| Rated current | 450 mA AC (45 °C) |
| 130 mA DC (45 °C) | |
| UC, the effective working current IC | ≤ 10 µA |
| Residual Flow IPE | ≤ 10 µA |
| Nominal discharge current In(8/20) & micro;s (core-core) | 10 kA |
| Rated discharge current In(8/20)& micro;s (core-ground) | 10 kA |
| pulse discharge current Iimp(350) & micro;s (core-core) | 1 kA |
| pulse discharge current Iimp(350) & micro;s (core-ground) | 1 kA |
| Total discharge current ITotal(8/20) µs | 18 kA |
| Maximum discharge current Imax(8/20) & micro;s (core-ground) | 18 kA |
| rated power pulse current lan (700)& micro;s (core-core) | 100 A |
| rated power pulse current lan (700)& micro;s (core-ground) | 100 A |
| Output voltage limit 1 kV/& micro;s (core-to-core) peak | ≤ 300V |
| Output voltage limit 1 kV/& micro;s (core-ground) peak | ≤ 300V |
| Output voltage limit 1 kV/& micro;s (core-core) static | ≤ 300V |
| Output voltage limit 1 kV/& micro;s (core-ground) static | ≤ 300V |
| Residual voltage ln,(wire-wire) | ≤ 160V (C2 - 10 kV / 5 kA) |
| Residual voltage ln,(wire-ground) | ≤ 200V (C2 - 10 kV / 5 kA) |
| voltage protection level Up(core-core) | ≤ 250V (B2 - 1 kV / 25 A) |
| ≤ 300V (B2 - 4 kV / 100 A) | |
| ≤ 270V (C1 - 1 kV / 500 A) | |
| ≤ 300V (C2 - 2 kV/1 kA) | |
| ≤ 320V (C2 - 4 kV / 2 kA) | |
| ≤ 330V (C2 - 10 kV / 5 kA) |