Phoenix UTWE 6/8 1-test terminal strip 3069064, test terminal strip, nominal working voltage: 400V, rated current: 24 A, connection quantity: 18, number of digits: 9, wiring method: screw connection, rated wiring capacity: 6mm2, first floor, cross section: 0.2 mm2 -10mm2, installation method: wall-mounted installation, color: gray
| Product Type |
test terminal strip |
| Bits |
9 |
| needle pitch |
8.2mm |
| connection quantity |
18 |
| Rows |
1 |
| potential |
9 |
| insulation characteristics |
| Overvoltage Category |
III |
| Rated surge voltage |
4 kV |
| rated conditions |
1.31W |
| test surge voltage |
5 kV |
| Rated cross section |
6 mm² |
| first layer |
| Connection Mode |
screw connection |
| thread |
M4 |
| Tightening torque |
1.5 ... 1.8 Nm |
| stripping length |
10mm |
| plug gauge |
A5 |
| connection meets standards |
IEC 60947-7-1 |
| Rigid conductor cross section |
0.2 mm² ... 10 mm² |
| cross-section AWG |
24 ... 8 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.2 mm² ... 10 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
24 ... 8 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.25 mm² ... 6 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.25 mm² ... 6 mm² |
| 2 wires of the same cross section, rigid wire |
0.2 mm² ... 2.5 mm² |
| 2 wires with the same cross section, flexible wire |
0.2 mm² ... 2.5 mm² |
| 2 wires with the same cross section, flexible, with sleeve but not plastic sleeve |
0.25 mm² ... 1.5 mm² |
| 2 wires with the same cross section, flexible, with TWIN sleeve and plastic sleeve |
0.5 mm² ... 2.5 mm² |
| Nominal current |
24 A |
| Maximum load current |
30 A (when connecting a conductor with a cross-sectional area of 10 mm²) |
| Rated voltage |
400V |
| Rated cross section |
6 mm² |
| Dimensional drawing |
|
| width |
107mm |
| height |
81mm |
| depth |
81mm |
| needle pitch |
8.2mm |
| plate thickness |
1mm ... 4mm |
