Phoenix PP-RJ-SCC-F-Distribution Frame 2703022, Distribution Frame, RJ45 Socket to In-Line Terminal, CAT5e,10/100/1000 Mbps,DIN Rail Adapter, IP20, Shielding Connection with Clamp, Shielding Current Monitoring, Surge Protection
| Product Type |
distribution frame |
| IEC Category |
C2 |
| MTTF |
3281 years (SN 29500 standard, temperature 25°C, duty cycle 21%) |
| 1245 number (SN 29500 standard, temperature 40°C, duty cycle 34.25%) |
| 472 years (SN 29500 standard, temperature 40°C, duty cycle 100%) |
| insulation characteristics |
| Overvoltage Category |
II |
| pollution level |
2 |
| electrical isolation |
FE // Ethernet |
| rated conditions |
0W |
| Rated insulation voltage |
85V DC |
| Power |
| Supply Voltage Range |
36V DC ... 52V DC ± 10% (via PoE) |
| 42V DC ... 57V DC (UL compliant) |
| Function |
| Name |
Shielding Current Monitoring |
| Open Threshold |
≥ 30 mA |
| Local Diagnostics |
yellow LED light |
| accuracy |
± 5% |
| response time |
3 s |
| current |
≤ 1.5 A |
| power consumption |
270 mW (shield current monitoring) |
| impedance |
≤ 1 Ω |
| voltage |
≤ 10V |
| data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3 |
| serial transmission rate |
10/100/1000 Mbps |
| Frequency Range |
125 MHz |
| Connection Mode |
in-line connection |
| Connection Method Considerations |
CAT5e |
| Pin Distribution |
1:1 |
| Transmission Length |
100 m (including tail cable) |
| single wire/wiring point, rigid |
0.2 mm² ... 1.5 mm² |
| single wire/wiring point, flexible |
0.2 mm² ... 1.5 mm² |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve |
0.25 mm² ... 1.5 mm² (only with CRIMPFOX 6 wire clamps) |
| flexible conductor cross-section with cold press head without insulation sleeve |
0.25 mm² ... 1.5 mm² (only with CRIMPFOX 6 wire clamps) |
| AWG Strand Maximum Cross Section, Flexible |
16 |
| AWG Wire Minimum Cross Section, Flexible |
26 |
| single wire/wiring point, maximum rigid AWG |
16 |
| Single Wire/End Point, Minimum Rigid AWG |
26 |
| stripping length |
8mm |
| transmission medium |
copper cable |
| Maximum output power |
60W |
| Maximum output current |
725 mA (PoE) |
| Current carrying capacity |
≤ 1.5 A (≤ 60W (PoE+)) |
| data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3 |
| Connection Mode |
RJ45 female connector |
| optical display |
yellow LED light |
| Dimensional drawing |
|
| width |
23.8mm |
| height |
101.3mm |
| depth |
86mm |
| color (shell) |
light gray (RAL 7035) |
| Identification Material (Shell) |
plastic |
| flame retardant rating to UL 94 |
V0 |
