Phoenix REL-MR-120AC/21-21-single relay 2961448, plug-in miniature power relay with power contacts, 2 PDTs, input voltage 120V AC
| Product Type |
Single relay |
| Mode of operation |
100% operating factor |
| mechanical life |
1x 107cycle |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Data Management Status |
| Last data maintenance date |
25.08.2025 |
| service life, electrical |
See Graph |
| rated conditions |
0.84W |
| test voltage (coil/contact) |
5 kV AC (50 Hz,1 min) |
| test voltage (contact/contact) |
2.5 kV AC (50 Hz,1 min) |
| test voltage (open contact) |
1 kV (50 Hz,1 min) |
| coil side |
| Rated input voltage UN |
120V AC |
| Input Voltage Range |
93.6V AC ... 186V AC |
| mains frequency |
50/60Hz |
| drives and functions |
monostable |
| drive (polarity) |
Inpolarity |
| UN |
7 mA (50Hz) |
| 5 mA (60Hz) |
| Typical Response Time |
3 ms ... 12 ms (depending on phase) |
| Typical Release Time Range |
2 ms ... 9 ms (depending on phase) |
| coil resistance |
8100 Ω ± 15% (at 20°C) |
| switching |
| Contact Type |
2 changeover contacts |
| Switch Contact Type |
single contact |
| Contact Material |
AgNi |
| maximum switching voltage |
250V AC/DC |
| Minimum Switching Voltage |
5V (10 mA) |
| limit continuous current |
8 A |
| Maximum impact current |
12 A (20 ms) |
| minimum switching current |
10 mA (5 V) |
| Maximum power rating (resistive load) |
190W (24V DC) |
| 85W (available for 48V DC) |
| 60W (available for 60V DC) |
| 44W (available for 110V DC) |
| 60W (available for 220V DC) |
| 2000 VA (available for 250V AC) |
| switch capacity |
2 A (24V, DC13) |
| 0.2 A (250V, DC13) |
| 3 A (24V, AC15) |
| 3 A (120V, AC15) |
| 3 A (250V, AC15) |
| UL 508 Motor Loads |
1/4 HP, 120V AC |
| 1/2 HP, 240V AC |
| Connection Mode |
Plugging/Soldering |
